I'm so in for updates on this. This car has always made me want an early Mk1 Scirocco. Keep up the good work, Matt.
1st of all, fer all youze yung'ns out there, this is what the Thread Title is referring to:
Some of us, at the time, having watched David Soul on Starsky and Hutch http://en.wikipedia.org/wiki/Starsky_and_Hutch found it very amusing, if not unsettling, to find him putting out a song album. (As apposed to a Comedy Album, Spoken Word, you know; all those categories the Grammys give out prior to the actual TV Broadcast...)
So, having acknowledged the ref, I'd plunge ahead-
the Tin Worm isn't Evil, but it's Hungry, always Hungry.
Kudos to those who get out the Resto Skillz and slap back the hands of Entropy.
Now, Here is where I ask forgiveness for being 'biggedy'; It's too low. For me.
That said, all is forgiven 'cause I see some tasty Blower Bits in there, so, this time, I'll let it go.
PS- Just to pin this in context to the reason why this particular song would be appropriate in more than one way for the Restoration of a 1970's era automobile, I submit the following from the Great Wiki:
"Dancing Queen" by ABBA
Billboard Hot 100 number one single
April 16, 1977
"Don't Leave Me This Way" by Thelma Houston
(Last night, on a long trip down the freeway, I actually said "If we keep listening to this station, we're going to hear some Pat Benatar ...")
Last edited by TBerk; 10-08-2012 at 12:43 PM.
Haha glad someone got that. Fun fact.. was a chart topping song in '77 when this car would have been new rolling off the lot. I may or may not be in the market for an in-car 8track player to rock in this car and that would definitely be an tape I'd be looking for!
Rust isn't too bad for an east coast car. I plan to have the major rust all repaired within a month (if I get the core support in that time frame) and then strip the engine out and start welding and cleaning up the bay. I'd love to drop it off for paintwork over the winter!
Low and fast and subtle custom is the name of the game with the cars I like to build.. this won't be any different.. but I may add airride to allow it to be parked at a "scirocco purist" height so don't fret!
More work on this tonight. I've got a fire under my ass to make this car 100% solid.
Tonight I decided to finish up the rot holes in the inner fender/wheel well. Exciting for me, but probably mundane to look at
First patches in place
Last piece formed and welded in place
A little flap disc action to blend the welds a little bit and its ready for some self etching primer and rubberized rust encapsulator. I want to do the entire wheel wells and inner fenders, so for now I just sprayed some fast etch to etch the metal and stop it from flash rusting. Next I'll move on to the drivers side inner fender rust. Moving right along
Thanks guys, I'm excited to bust out some work on this in between my other projects. If I get time tonight I may start tackling the rust on the passenger inner fender/wiper cowl intersection. From there it's a quick patch on the inner passenger rocker/floor union and I can move onto fun stuff like shaving the side markers and such
Tonight I tackled the edge of the wiper cowl rot. I first cut out the rotted area.
I started by bending up a piece of construction paper to the rough size I needed, then I cut it out of 20 gauge aluminized steel. I then measured the other side and marked out the bend line I needed to make.
I then used the new Eastwood versa bend metal brake to make a crisp 90 degree bend in the patch panel.
I then used the Eastwood MIG 135 with .023/.6 mig wire to weld the panel in place. I slowly welded and formed the panel to shape. Then I used a flap wheel on the angle grinder to blend the welds and flow the patch panel into the original metal. I'll be treating and sealing all of this once I replace the front core support.
More later this week
droppin science like gallileo dropped a orange
why is there braille on a drive up ATM?