What am I missing, diagnostic steps / manual

[RIP97vr6]

I see a few posts here describing diagnostic steps in great detail. I have a Vag-Com, I purchased the Bently CD at the same time from Ross-Tech for my mkiv R32. I'm not sure if i'm doing something wrong but I've used the manual a few times and browsed around and found nothing like diagnostic steps using the Vag-Com (or the factory tool).
Am I missing the important place on the manual or did i buy the wrong one (need a shop type manual?)
I want to maximize the use of this great tool and i find i'm only using it to scan after cel's.

[RIP97vr6]

for instance, when i open a module there are "safe" and "refer to manual" areas. I have never seen anything in my CD Bentley manual which discusses the "refer to manual" blocks. Is it there? do i need another manual?

[RIP97vr6]

I guess i need to pay:
Thursday,04,October,2012,17:04:52:32199
VCDS Version: Release 11.11.4 (x64)
Data version: 20120807
ama's shop of horrors



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 1J - VW Golf/Bora IV
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75
76

VIN: WVWKG61J94D099723 Mileage: 191000km/118681miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 022-906-032-AYL.lbl
Part No SW: 022 906 032 EJ HW: 14. 4.0 3
Component: United R32 G 6401
Coding: 0000132
Shop #: WSC 31414 000 00000
VCID: 57B678AFE570A3A030F

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1C0-907-37x-ESP-A.lbl
Part No: 1C0 907 379 P
Component: ESP ALLRAD MK60 0101
Coding: 0023049
Shop #: WSC 31414 000 00000
VCID: 3776D82F453043A0D0F

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 3Bx-907-044.lbl
Part No: 3B1 907 044 C
Component: CLIMATRONIC C 2.0.0
Coding: 11200
Shop #: WSC 31414
VCID: 21421677ABB42D100EB

1 Fault Found:
01274 - Air Flow Flap Positioning Motor (V71)
37-10 - Faulty - Intermittent

-------------------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Part No: 1C0 909 605 F
Component: 17 AIRBAG VW61 0108 0003
Coding: 12599
Shop #: WSC 31414
VCID: 2756086FC590D32040F

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments Labels: 1J0-920-xx5-17.lbl
Part No: 1J0 920 927 A
Component: KOMBI+WEGFAHRSP VDO V03
Coding: 15230
Shop #: WSC 08160
VCID: 29520E57D384E55056B
WVWKG61J94D099723 VWZ7Z0C8659712

1 Fault Found:
01304 - Radio
49-00 - No Communications

-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901-19.lbl
Part No: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 31414
VCID: F0E4A333B0DE5498515

1 Fault Found:
01304 - Radio
49-00 - No Communications

-------------------------------------------------------------------------------
Address 22: AWD Labels: 02D-900-554.lbl
Part No: 02D 900 554 D
Component: HALDEX LSC ECC 0011
VCID: 21421677ABB42D100EB

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 1C0-959-799.lbl
Part No: 1C0 959 799 C
Component: C7 Komfortgerát HLO 0003
Coding: 00064
Shop #: WSC 31414
VCID: 3776D82F153043A0D0F

Subsystem 1 - Part No: 1C1959801A
Component: C7 Tõrsteuer.FS KLO 0202

Subsystem 2 - Part No: 1C1959802A
Component: C7 Tõrsteuer.BF KLO 0202

1 Fault Found:
01330 - Central Control Module for Central Convenience (J393)
37-00 - Faulty

End ---------------------------------------------------------------------

[Jack@European Parts]

First off VW-Audi in about 2003/4 moved all the OBD genuine diagnostic path information to GGF in the VAS tester, to further secure there advantage from the aftermarket getting the information to repair cars.

However!

In VCDS, each block has parameters in captions when highlighting a block for the most part with a spec. Not all blocks have the data, but most of them do.

A fact which makes the VCDS tester superior over the OEM VAS tester in many instances.

Oh and don't duplicate posts please.

Get a MAF already!