Anyone buy and install the ECS Reverse Camera Kit?

[DarkNeo]

http://www.ecstuning.com/Search/ES1905735/

I bought this kit months ago, finally installed it a few weeks ago. Ran the wires and installed as the instructions said:




Ran into the first problem, ECS pinned the reverse signal connector wrong . Easy fix just switch the 2 wires in the connector and fixed

Coded the RNS-510 for the reverse camera and success!

Camera opened when reverse was engaged and got a picture




The next day, I give it another test before reinstalling the trim...no picture . Camera opens, RNS shows the reverse screen but no image. I check all connections, recode and reset the RNS, still nothing. Gotta be a bad coaxial, ordered a new one, same problem .

Contacted ECS and told them about the problem. They won't send me a new camera badge because I modified the harness? . So because I fixed the mistake in their own harness, I somehow messed up the camera by making it work correctly? Oh but they did send me a new harness with the same problem as the original . Anyone here with this kit having the same problem?

[DarkNeo]

Bump

[ECS Tuning]

PM sent!

Andy

[DarkNeo]

PM sent!

Andy

[DarkNeo]

The new camera badge didn't solve my problem . I'm completely lost

[King Luis]

Loose or pinched cable?
Try recoding it again?

[ECS Tuning]

So it is not the unit as we now come to find out, since we sent a new one out - please recheck wiring, fuses, grounds, ect with the install. If you are still having issues after this please check with your local auto shop for more help.

Andy

[kern417]

i had this issue with an aftermarket headunit in my old car. when i first installed it the screen worked great but the 2nd day i tried to watch a movie and nothing. the screen came up and i could even hear the sounds of the dvd main screen going through the speakers, but no actual picture. i always assumed it was a blown fuse or something like that but i never actually got it fixed. i'd definitely check wiring/fuses first with relation to the headunit.

have you done anything to it to prevent battery drain?

[DarkNeo]

Been checking the wiring. Looks good. Checked it with a voltage meter, power is good. Camera opens, closes. RNS screen changes to reverse...just no picture.