They aren't anything special. They are just regular screws. Find something about the same diameter with a semi corse thread from the hardware store. The thread doesn't have to be exactly the same because the holes aren't actually threaded iirc.
#1
Does anyone have the part number handy for the screws that are used to mount the corrado headlights to the upper radiator support? Thank you.
-Robert
#2
They aren't anything special. They are just regular screws. Find something about the same diameter with a semi corse thread from the hardware store. The thread doesn't have to be exactly the same because the holes aren't actually threaded iirc.
Stephen
Portland, OR
Black 1990 1.9L Stage 5 G60 - keeper
Corrados decay in a way that can only be measured using quantum physics
http://sites.google.com/site/corradoproject/
#3
#4
while you look that up the plastic inserts that screws go into would be killer.![]()
Thinking about a TDI swap? Review the TDI swap directory
My AHU-TDI Corrado's Conversion to European Spec AFN-VNT
#5
#6
Thank you sir![]()
Thinking about a TDI swap? Review the TDI swap directory
My AHU-TDI Corrado's Conversion to European Spec AFN-VNT
#8
The 2 that go in the upper tabs are N0139694
In the remarks section, B4, 8x16
And the screw that mounts in the back is N0139729, remarks ST4, 8x25-C
#9
![]()
Many thanks for the part numbers! I had the top screw properly identified, but wanted to be positive that was it in the end.
-Robert