Help with map table ms2 extra

[TDIGB69]

Can som one point me out or have a descent table to get me started , stock 1.8t awp with ms2 extra .
Thanks .

[ps2375]

http://spitfireefi.com/downloads.shtml

[ValveCoverGasket]

oughta be able to use the 1.8t spark map on there no problem... fuel will probably need fudging regardless but the 1.8t fuel map on there could be a good start

[TDIGB69]

oughta be able to use the 1.8t spark map on there no problem... fuel will probably need fudging regardless but the 1.8t fuel map on there could be a good start

thank you guys , i had a nother question , what does the autotune mode does for me on the tunerstudio program ?

[ValveCoverGasket]

itll let you drive around and have tunerstudio make tweaks to your fuel table (if youve got a wideband connected to MS, and reading properly), so you can tune and drive the car at the same time... its also a pretty quick way to make changes initially.

[TDIGB69]

itll let you drive around and have tunerstudio make tweaks to your fuel table (if youve got a wideband connected to MS, and reading properly), so you can tune and drive the car at the same time... its also a pretty quick way to make changes initially.

am naw trying to figure out haw to load does new tzbles in to my controler i guess once i figure it out it will be all good , bing trying to figure all this out for the las year and 1/2 almost finish thank god .

[TDIGB69]

why am i finding this so hard to load in to my settings

[ps2375]

if you load the MSQ, then export the table to the desktop, then open your MSQ and import the table, should go easy. If not, you may have to do a prtscrn and edit it manually. Or save the Fuel Table and import that to your tune.

[need_a_VR6]

I would download the msq of interest and open in ts with a temp project and export the tables. Trying to port msqs across versions get tricky.

[TDIGB69]

if you load the MSQ, then export the table to the desktop, then open your MSQ and import the table, should go easy. If not, you may have to do a prtscrn and edit it manually. Or save the Fuel Table and import that to your tune.

my msqt vercion is 2.0.6 and not 3.1.1 , naw what ? re write the controler with the 3.1.1 vercion ?
thanks for the suport and all the help .

[ps2375]

Save the Fuel map and import that one.