PS. If anyone is unsure of the specifics of the Tial MVS waste gate this link gives all the info you need. http://www.tialsport.com/prod_wg_mvs.htm
+ Reply to Thread
Results 1 to 18 of 18
Thread: FS 2 Tial MVS waste gates
-
Junior Member
- Join Date
- Nov 3rd, 2011
- Location
- Phoenix, AZ
- Posts
- 71
- Vehicles
- 2002 MKIV 1.8T(project) 2005 Audi S4(Daily)
FS 2 Tial MVS waste gates
10-09-2012 08:17 PM
#1
Just like it says I have 2 Tial MVS waste gates for sale. Was piecing together the parts for a twin scroll 3076 set up but decided to sell the car because I'm getting out of the military in a little over a year and need to save up as much cash as I can. The wastegates are BRAND NEW still in the box. They are silver and come with all the fittings and hardware and 17.5lb springs. I bought both of them new for around 490 total so I'd like to get 450 for both if I can (225 each). If you are interested you can text me at 585-410-0020 and I can send you pictures. I'm in the Phoenix AZ area so If you are local and willing to meet me half way I could work that out. If not I can easily look up shipping costs and get back to you. Thanks guys.
-
Junior Member
- Join Date
- Nov 3rd, 2011
- Location
- Phoenix, AZ
- Posts
- 71
- Vehicles
- 2002 MKIV 1.8T(project) 2005 Audi S4(Daily)
10-09-2012 08:18 PM
#2
-
Junior Member
- Join Date
- Nov 3rd, 2011
- Location
- Phoenix, AZ
- Posts
- 71
- Vehicles
- 2002 MKIV 1.8T(project) 2005 Audi S4(Daily)
-
Member
- Join Date
- Nov 17th, 2002
- Location
- Tempe, AZ 85281
- Posts
- 12,076
- Vehicles
- Sonoma S-15, Mark 3 Caddy, Audi A4, 71 CL175, 71 CB350, 69 Stinger, V-Twin Chopper, A4 SC'd Avant,
10-10-2012 04:16 AM
#4
Holy cr*p.....there's other Vortex members in Phoenix...?
Seems like 99% of the populas is on the East Coast. And dam, just bought my MVS last week.
FS:Extensively Moddified 350+ hp Mark I to Mark III conversion Caddy truck:
http://forums.vwvortex.com/showthrea...dy-W-Video-10K
FS: Custom '69 Stinger FS: iForged 3 Piece 19x9 5x112 Falken 452's
FS: Custom '73 CB350 Museum Piece, 8 miles FS: 10' V-Twin Chopper: SOLD
-
Junior Member
- Join Date
- Nov 3rd, 2011
- Location
- Phoenix, AZ
- Posts
- 71
- Vehicles
- 2002 MKIV 1.8T(project) 2005 Audi S4(Daily)
-
Junior Member
- Join Date
- Nov 3rd, 2011
- Location
- Phoenix, AZ
- Posts
- 71
- Vehicles
- 2002 MKIV 1.8T(project) 2005 Audi S4(Daily)
-
Member
- Join Date
- Nov 16th, 2011
- Location
- Fountain Hills, AZ
- Posts
- 1,027
- Vehicles
- '02 Audi TT 180q | '85 GTI VR6
10-31-2012 02:57 AM
#7
what size is the external wastegate? and to make sure, it is not v band is it?
33mm, 44mm, 50mm?
LMK.2002 Audi TT 180HP Quattro - Stage II Revo - VTDA & MOFO - Forge Turbo Inlet - Forge BOV/Splitter - 3 BFI 1.0 Mounts - 3" DP - 3" Exhaust Cat-Delete - N75 "J" valve - ST Coils - H&R rear sway bar - HRE 441r Wheels
1985 VW GTI VRT - Build Thread - Garrett GT35R coming soon!
Slide-Lok Garage Interiors | Phoenix Garage Makeovers | Paver Coatings| Mirabel Coatings
-
Member
- Join Date
- Nov 17th, 2002
- Location
- Tempe, AZ 85281
- Posts
- 12,076
- Vehicles
- Sonoma S-15, Mark 3 Caddy, Audi A4, 71 CL175, 71 CB350, 69 Stinger, V-Twin Chopper, A4 SC'd Avant,
10-31-2012 04:26 PM
#8
What the hell? Another local...well, that makes 3 people in the entire state.
They are 38mm, and as I understand it MVS's only came in v-band.FS:Extensively Moddified 350+ hp Mark I to Mark III conversion Caddy truck:
http://forums.vwvortex.com/showthrea...dy-W-Video-10K
FS: Custom '69 Stinger FS: iForged 3 Piece 19x9 5x112 Falken 452's
FS: Custom '73 CB350 Museum Piece, 8 miles FS: 10' V-Twin Chopper: SOLD
-
Member
- Join Date
- Nov 16th, 2011
- Location
- Fountain Hills, AZ
- Posts
- 1,027
- Vehicles
- '02 Audi TT 180q | '85 GTI VR6
10-31-2012 05:44 PM
#9
ok.. So i assume my turbo has to have vband or my exhaust manifold has to have vband to run it then right?
GLWS, but I need a regular wastegate.2002 Audi TT 180HP Quattro - Stage II Revo - VTDA & MOFO - Forge Turbo Inlet - Forge BOV/Splitter - 3 BFI 1.0 Mounts - 3" DP - 3" Exhaust Cat-Delete - N75 "J" valve - ST Coils - H&R rear sway bar - HRE 441r Wheels
1985 VW GTI VRT - Build Thread - Garrett GT35R coming soon!
Slide-Lok Garage Interiors | Phoenix Garage Makeovers | Paver Coatings| Mirabel Coatings
-
Junior Member
- Join Date
- Nov 3rd, 2011
- Location
- Phoenix, AZ
- Posts
- 71
- Vehicles
- 2002 MKIV 1.8T(project) 2005 Audi S4(Daily)
-
Junior Member
- Join Date
- Nov 3rd, 2011
- Location
- Phoenix, AZ
- Posts
- 71
- Vehicles
- 2002 MKIV 1.8T(project) 2005 Audi S4(Daily)
10-31-2012 06:29 PM
#11
And yes your turbo Mani has to have a v-band fitting. Not a t3, t4, etc...
-
Junior Member
- Join Date
- Nov 3rd, 2011
- Location
- Phoenix, AZ
- Posts
- 71
- Vehicles
- 2002 MKIV 1.8T(project) 2005 Audi S4(Daily)
-
Junior Member
- Join Date
- Nov 3rd, 2011
- Location
- Phoenix, AZ
- Posts
- 71
- Vehicles
- 2002 MKIV 1.8T(project) 2005 Audi S4(Daily)
-
Junior Member
- Join Date
- Nov 3rd, 2011
- Location
- Phoenix, AZ
- Posts
- 71
- Vehicles
- 2002 MKIV 1.8T(project) 2005 Audi S4(Daily)
-
Member
- Join Date
- Nov 22nd, 2009
- Posts
- 251
FS 2 Tial MVS waste gates
12-19-2012 06:23 PM
#15
38mm vbands? 425 and ill take both
-
Member
- Join Date
- Nov 22nd, 2009
- Posts
- 251
FS 2 Tial MVS waste gates
12-19-2012 06:24 PM
#16
38mm? $425 shipped and ill take both
-
Member
- Join Date
- Sep 8th, 2010
- Location
- Antigua W.I
- Posts
- 144
- Vehicles
- 2000 VW Golf Gti 1.8T AGU
-
Junior Member
- Join Date
- Nov 3rd, 2011
- Location
- Phoenix, AZ
- Posts
- 71
- Vehicles
- 2002 MKIV 1.8T(project) 2005 Audi S4(Daily)
01-07-2013 11:39 AM
#18
sorry for the late reply. Both wastegates are sold! thanks guys
Originally Posted by The A1 and A2 German
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
For advertising information click HERE
