VWVortex.com - :: GruvenParts.com Custom Billet Accessories and Much More !
Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Results 1 to 10 of 10

    Thread: :: GruvenParts.com Custom Billet Accessories and Much More !

    1. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,310
      Vehicles
      Too many to list !
      09-28-2016 03:46 PM #1
      "
      Corrado Billet Hood Cable Clip

      The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

      Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it’s parts from CNC'd billet.

      Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)
      "

    2. Banner Advertiser GruvenParts.com's Avatar
      Join Date
      Jul 31st, 2007
      Location
      Atlanta, GA
      Posts
      19,310
      Vehicles
      Too many to list !
      10-15-2016 09:11 AM #2
      "


      Click Here for Peloquin Limited Slip Diffs Sold By GruvenParts


      *** GRUVEN BEATS ALL COMPETITOR PRICING - Email Paul@GruvenParts.com for Current Pricing Info ***
      We almost always have group buys and specials going on, to get in on the best pricing for these diffs, just email us!


      We've all used his legendary limited slip differentials for years.

      GruvenParts.com is proud to team up with Gary Peloquin to become the newest distributor of these great front and rear limited slip diffs for a wide range of vehicles. If you dont already have 1 installed, trust us, YOU NEED 1! These limited slip diffs improve acceleration, braking, and cornering. Win-Win-Win.

      GruvenParts.com has the best pricing and customer service, please contact us for more info on these great limited slip diffs!

      We offer the following Peloquin LSD's and some others. Please provide your transmission code and shipping address when inquiring via email.

      02M :
      02M-498-005B (02M498005B) MK4 R32 / Audi TT MK1 Front Diff P/N
      MK4R32 / Audi TT MK1 Rear Diff
      02M-498-005A (02M498005A)

      020
      020-498-005A (020498005A)
      020 – 80% kit - This kit increases the factory 20% anti torque steer effect to 80%.

      02J
      02J-498-005A (02J498005A)
      02J-498-005B (02J498005B)

      02A
      02A-498-005A (02A498005A)

      02K
      02K-498-005A (02K498005A)

      02C
      02C-498-005A (02C498005A)
      02C-498-005B (02C498005B)
      02C-498-005 Rear (02C498005)

      02Q
      02Q-498-006A (02Q498006A)
      02Q-498-005B (02Q498005B)

      02E DSG 2WD and 4WD"

    3. 10-27-2016 11:11 PM #3
      "
      Corrado Billet Hood Cable Clip

      The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

      Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it’s parts from CNC'd billet.

      Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)
      "

    4. 11-28-2016 10:53 PM #4
      "
      Corrado Billet Hood Cable Clip

      The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

      Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it’s parts from CNC'd billet.

      Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)
      "

    5. 12-14-2016 12:22 AM #5
      "
      Corrado Dash Vent Fix Kit!

      GruvenParts.com is happy to release this dash vent fix kit for all 1989-1992 Corrado G60 and SLC.

      These plastic replacement linkages replace the OEM brittle rubber molded linkages that position the slats on the vents. Once the OEM linkages fail, the slats on your vents flop around and no longer direct vent airflow correctly.

      This is a common issue that Tek Euro saw fit to fix and we are happy to distribute for them.
      This product fits all 1989-1992 Corrado G60 and Corrado SLC with the ""old style"" vents (all Corrado with non-rotary style HVAC controls).
      "

    6. 12-15-2016 10:42 PM #6
      "
      Corrado Billet Hood Cable Clip

      The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

      Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it’s parts from CNC'd billet.

      Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)
      "

    7. 01-09-2017 09:14 PM #7
      "
      Corrado Billet Hood Cable Clip

      The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

      Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it’s parts from CNC'd billet.

      Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)
      "

    8. 02-13-2017 10:53 PM #8
      "
      Corrado Dash Vent Fix Kit!

      GruvenParts.com is happy to release this dash vent fix kit for all 1989-1992 Corrado G60 and SLC.

      These plastic replacement linkages replace the OEM brittle rubber molded linkages that position the slats on the vents. Once the OEM linkages fail, the slats on your vents flop around and no longer direct vent airflow correctly.

      This is a common issue that Tek Euro saw fit to fix and we are happy to distribute for them.
      This product fits all 1989-1992 Corrado G60 and Corrado SLC with the ""old style"" vents (all Corrado with non-rotary style HVAC controls).
      "

    9. 04-24-2017 11:24 PM #9
      "
      Corrado Dash Vent Fix Kit!

      GruvenParts.com is happy to release this dash vent fix kit for all 1989-1992 Corrado G60 and SLC.

      These plastic replacement linkages replace the OEM brittle rubber molded linkages that position the slats on the vents. Once the OEM linkages fail, the slats on your vents flop around and no longer direct vent airflow correctly.

      This is a common issue that Tek Euro saw fit to fix and we are happy to distribute for them.
      This product fits all 1989-1992 Corrado G60 and Corrado SLC with the ""old style"" vents (all Corrado with non-rotary style HVAC controls).
      "

    10. 05-03-2017 11:13 PM #10
      "
      Corrado Billet Hood Cable Clip

      The Corrado hood release cable clip (mounted to the hood pull bracket near the drivers left knee) is notorious for breaking at the worst possible time -- when you need to open the hood.

      Rather than using a cheap stamped version which will break again in short order, our version is precision CNC'd from a solid chunk of aerospace grade billet aluminum and installs in minutes. No need for the time consuming task of removing the ENTIRE cable, this one slips right onto the hood pull bracket and locks in with all supplied fasteners included. VW doesnt even sell the hood clip anymore, but even if you found 1 it would be a waste of time to remove the entire hood cable to put it on, as it would break again in short order. Skip the cobbled together mystery versions floating around as well, ours is designed right! We LOVE Corrado so we're happy to reincarnate it’s parts from CNC'd billet.

      Fits ALL Corrado and replaces Clip P/N 535-823-567 (535823567) that installs on cable P/N 536-823-531 (536823531)
      "

    For advertising information click HERE

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •