WI-foxcities, dubbers!!!!!

[ButchHusky]

So final headcount, who's in for Badger Go Karts and Pizza?

If people are going, I'll go as well!

Brian

[HCClubPrez]

Bummer I missed go-karting... I was a big "maybe" all week, and just couldn't get away. Hope you had fun!!!

[Barren]

We managed 3 times on the carts and nobody got kicked out??? Although, I did receive my "last warning".

[.:brokeswagn:.]

Selling my MK3, I would love for it to stay local..
http://milwaukee.craigslist.org/cto/3293925093.html

[Soup Guy]

Selling my MK3, I would love for it to stay local..
http://milwaukee.craigslist.org/cto/3293925093.html

I'll vouch for how clean this car is. Good luck with your sale Clint. Do you still have the Raddo?

[Soup Guy]

On another note, on Saturday we are doing a cars and coffee sort of event at Beckets. 8 AM, be there, anybody is welcome....

[wreckedmyteg]

Anyone know of a service shop that specializes in BMW?

Need to find an independent dealer that's got an Auto Logic unit to re-flash my ECU.

Bergstrom wants ~250. Eff that.

[wreckedmyteg]

On another note, on Saturday we are doing a cars and coffee sort of event at Beckets. 8 AM, be there, anybody is welcome....

Anyone going to the real coffee and cars saturday?

I'll be there...followed by King dyno days on the 20th...

[SirRipo]

Anyone have experience getting the O2 sensor off the cat on an OBD2 MkIII? Having a little issue getting it off. I'm assuming it disconnects somewhere besides the engine, but I'm having issues figuring out how to do it exactly.

[Ziptied]

Anyone have experience getting the O2 sensor off the cat on an OBD2 MkIII? Having a little issue getting it off. I'm assuming it disconnects somewhere besides the engine, but I'm having issues figuring out how to do it exactly.

There should be a plug somewhere by the rear motor mount.

[knottyvr6jetta]

If nothing has ever been messed with there should be a little bracket thing on the rear mount the wires are routed into.

[SirRipo]

Faaaack. Rusty nuts on the rear exhaust support stripped. Guess I'm not getting that off today. Headache after headache so far...may have to see if there's a shop somewhere that will do it with just the test pipe. Anyone know of a place in fondy?

[SirRipo]

Faaaack. Rusty nuts on the rear exhaust support stripped. Guess I'm not getting that off today. Headache after headache so far...may have to see if there's a shop somewhere that will do it with just the test pipe. Anyone know of a place in fondy?

Anyone have any ideas on a place that will do it? Or someone in the area who might have the ability to help me out and would be willing to come give me a hand in exchange for some

[vwfreek]

Looking for a winter project? I'd take a beater with a heater in trade.

1964 VW Beetle

[ShowYourTTs]

Rick Hinze or his shop partner can prob. handle that.

920-716-4779

[Davis.]

Guys, if you haven't already, and have a Facebook, head over to www.facebook.com/lwrstndrds and "like" our page.

Our first feature went live today! Photos and words by your's truly




Brian Griebl's Volkswagen GLI

[Rainkey]

sick gli same color as mine. Where is that one from?

[yo vanilla]

[yo vanilla]

Anyone know of a service shop that specializes in BMW?

Need to find an independent dealer that's got an Auto Logic unit to re-flash my ECU.

Bergstrom wants ~250. Eff that.

Meisters?

[jwalker1.8]

Well time to move on. The TT and I had a good run but its officially over. The car is for sale for the next 3 weeks then if no realistic offers it will sadly be fully parted out

Old TT





New 2010 Maxima







New project in mind but no ETA at this time.

[Dmiller1409]

Hey my name is David. I am over by waupaca but i make my way to appleton quite often

I have a Gti 337. You might see me around but as soon as the snow flies i am parking it for the winter.

Here are a couple pics




I also delivered pizza's in it around the New London, Hortonville area! hahaha

[rotharpunc]

What's up everyone? I live in Appleton and drive a black MK4 2.0 thats mostly stock for now. I'd like to meet some people around here, ive seen several nice dubs around town but never have a chance to catch the owners.

[wreckedmyteg]

Hey my name is David. I am over by waupaca but i make my way to appleton quite often

I have a Gti 337. You might see me around but as soon as the snow flies i am parking it for the winter.


I also delivered pizza's in it around the New London, Hortonville area! hahaha

Where did you buy your 337? It looks like my old one, albeit missing the BBS RC's and the front lip looks gone.

Got any pics of the engine or interior?

[wreckedmyteg]

Spotted - Cory cruising down 441 yesterday. ALMS TT license plate? Thought it said Thera?

Went to back to King this weekend for another dyno session.

Pretty happy with the results:



355.8 hp and 371.17 ft lbs.

Since my last dyno session - I changed tunes from Dinan S2 to Cobb, and installed an Injen intake. Pretty good numbers for just a flash and intake!

Picked up 32.15 hp and 47.96 ft lbs over the last configuration. Losing a lot up top due to heat soak - can't wait to go back next spring with down pipes and an IC, hopefully I'll break 400 whp. Should be good for mid 11's on the 1/4.

[wreckedmyteg]

Hey my name is David. I am over by waupaca but i make my way to appleton quite often

I have a Gti 337. You might see me around but as soon as the snow flies i am parking it for the winter.

That's my old car. I was the 2nd owner. Would you mind sharing what you paid for it and where you found it?

I had it pretty tastefully modded - APR 93 software, APR 3" downpipe, TIP, HKS rear sway bar, SPEC stage 3 clutch, NSP boost gauge in a 42dd pod, etc.

Some kid from Sheboygan (I think) bought it from me and riced it out pretty good - then was trying to sell it for more than he paid. That was the last I saw of it.

[yeroc40]

Sold the Jetta, but still have the winter wheels

$250 to go

[Dmiller1409]

That's my old car. I was the 2nd owner. Would you mind sharing what you paid for it and where you found it?

I had it pretty tastefully modded - APR 93 software, APR 3" downpipe, TIP, HKS rear sway bar, SPEC stage 3 clutch, NSP boost gauge in a 42dd pod, etc.

Some kid from Sheboygan (I think) bought it from me and riced it out pretty good - then was trying to sell it for more than he paid. That was the last I saw of it.

I bought it from a kid in Green Bay in March. I Bought it for 5900 (With option of 4900 without rims)

He lost the front lip due to backing out of driveway in WINTER!

Ill get some pictures of interior to post today.

[wreckedmyteg]

I bought it from a kid in Green Bay in March. I Bought it for 5900 (With option of 4900 without rims)

He lost the front lip due to backing out of driveway in WINTER!

Ill get some pictures of interior to post today.

Yea, I can already tell it's my old car. I'm the guy that put together the huge spreadsheet with each gas fill up, mod, etc.

That was a fun little car - and pretty competitive at auto-x's. I placed first in my class every time I raced it.

[Dmiller1409]

Yea, I can already tell it's my old car. I'm the guy that put together the huge spreadsheet with each gas fill up, mod, etc.

That was a fun little car - and pretty competitive at auto-x's. I placed first in my class every time I raced it.

Yup! When i bought it they gave me a huge file of all the work that has been done to it!

i took the car to volkswagon in appleton and had them check everything over and they said that for the miles it has (180k), that everything was pretty close to perfect (Mechanically)

i can drive it 5k miles on synthetic oil and not use a drop! i am so happy with this car and i am glad to know that it was taken care of so well.

As of now i am saving up money for a new radiator / front lip
then possibly get it repainted (same color)

[notajetta]

hey strangers, anybody feeling ambitious enough to have a go at a cheap mk1 cabriolet project?
http://forums.vwvortex.com/showthrea...riolet-project

[ChasingFreedom]

Anyone know somebody in the area that has vag com to do some simple coding (disable drls, amber turns)?

[Basil Fawlty]

B4 Passat Wagon Vr6 5spd for Sale in Baraboo

[Barren]

Anyone know somebody in the area that has vag com to do some simple coding (disable drls, amber turns)?

Showyourtts has a vagcom, I believe the price is He posted on this page, he's in Neenah.

Wow, I haven't been here in awhile.. been crazy busy. Sadly, I closed the hood and put the cover over the corrado on Saturday.... haven't touched it since the last push to get the new engine in.. not sure if it will get touched again till spring, we'll see. Sad to see it just sitting there with a new heart ready to be transplanted into it. I'll have to make some arrangements to get an engine hoist in the spring for a day to get the big swap done.. then it's all about hooking **** back up.

Cool to see a local modded dub back in good hands and unriced!

[vwfreek]

Be the only one on the block with one of these next show season:

Bertils racing head

[ShowYourTTs]

Spotted - Cory cruising down 441 yesterday. ALMS TT license plate? Thought it said Thera?

Yep...got new plates. The old ones were from my Ex and I. Plus they were endangered species plates and expensive as hell to renew.

Damn.....quiet in this place.

And yes...I have a VAGCOM. Will borrow for beer. PM me.