VW Vortex - Volkswagen Forum banner

Java^Tiggy Photo/Progress Thread

24K views 116 replies 29 participants last post by  snobrdrdan 
#1 · (Edited)
Very First Original Post: "Well everyone, just want to officially say hello! I am getting my 2012 Tiguan SE 4Motion with Sunroof and Navi within the next week and I wanted to create a thread for pictures and to mark my progress as I go along with modifications. I look forward to meeting all of you on here!"

Edits with Build Progess:

Ok so after I got the Tiguan it wasn't long until I decided something needed to change so I thought long and hard about what wheels I wanted and I ended up getting some sweet Matte Black 18x8 Audi A8 reps that I put the stock rubber on. So far I have had no complaints with the ride and im enjoying the extra inch even though they are the same tires.

Here was a shot taken of the car with the new wheels shortly after install:

That was taken at Dubs on Defrost, my very first VW show :)

After the wheels I decided to get an intake but instead of going the APR route which many have taken, i decided to support a smaller startup and purchase a Modshack Intake. I was the gineau pig for the intake and there was some small adjustments but its fitting and working wonderfully.

Here is a shot of the intake installed, also at DoD:



After the Intake I went for tint, I chose 35% for the front and 50% for the rear which with the stock tinting everything came out very close to the same shade with it slightly darker still in the rear.

I also bought a couple accessories for the fun things I like to do, Mountain biking and snowboarding. So I picked up an Inno-FR Cross bar set and Inno dual bike carrier for the hitch.

Here is a shot of the Tig with the roof rack on at my car clubs annual BBQ:



Now that I had it looking sleek I wanted to see a bit better so I got a set of 35W 3000K HID Fogs with Lamin-X Yellow vinyl on the lenses and a set of 6000K Halogen replacement bulbs for the low beams. I also tried my hand at vinyling and covered my front and rear emblems with CF vinyl.

Heres a shot of those:



With the help of a new awesome company that was started(Performance Street Industries, PSI) by one of our clubs OG members I ordered an AutoMeter boost gauge and installed that into a Steering column gauge pod. The install was quite interesting but I finally got it to work by taping into the fuse used to power the right control stalk of the steering wheel.

Here is a shot or two of the gauge installed:



I treated myself to the APR Stage 2 tune with all options for my birthday when a sale was going on and it has been sitting in the stock setting until a downpipe was purchased. After going back and forth with several companies trying to find out if they would be willing to manufacture a 3" DP for a Tiguan with 4motion, I ended up going with the 2.5" Techtonics Tuning Downpipe with a single cat.

I have since received it and its sitting in my living room as such:


I have spoken to a local Exhaust/Performance shop and I will soon be getting this installed with a custom cat back made just to my liking. Once its made and installed I can unleash the Stage 2 awesomeness!

I also ordered custom NY vanity plates for the Tig that will say "TIGGY" on them. I am going to purchase a front tow hook mounted plate holder, and bumper plugs for the holes that will be there after taking off the stock holder

On 8-28-2012 I decided that my ventures into the bagged scene are not going to happen. I decided that I no longer want to go this direction but instead do what I really want. With that said I ordered a new present for the Tig that I am hoping will get here before H20i :)

9-16-2012 - I thought I would update everyone with some additions that have been put on the car. I put the cross bars back on and installed my new SportRack Roof Basket!!! I also installed my new 2" Hitch and D-Ring receiver along with my GoMiniGo Front Tow Hook mounted Plate holder. I got a set of color matched bumper plugs that will be going in and hopefully I will mount my spare on the basket for H20i :) Everything is coming together nicely, its just a shame I couldn't get the cat back done before the trip.
Here are some updated pics, excuse the filth :)













Newest pictures with the new wheels :) :) :)








NEW NEW PIC WITH THE NEWEST WHEELS :)



Here is a full list of all mods, items purchased thus far:

Exterior Aesthetics:
VW Emblem PlastiDipped Black - Front
VW Emblem PlastiDipped Black with Carbon Fiber "backlay" - Rear
Tint - 35% Front/ 50% Rear
6000K Halogen Low Beams
OEM LED Fog Light Housings
LED Parking/City Lights
LED License Plate Lights
Bumper Plugs - Set of Deep Black Pearl
US Mill Works Front Tow Hook LP Bracket

Exterior Accessories:
Draw-Tite 2" Hitch
SmittyBilt Receiver Hitch D-Ring
Curt Class III 2" Hitch Ball
INNO IN-FR Roof Rack Crossbars
INNO Hitch 2-Bike Carrier

Wheels:
Summer Set
18x8.5 et45 Rotiform TMB
255/45r18 Sumitomo HTR Z III XL

All Season Set - FOR SALE
19x8.5 et35 Matte Black BBS CX-R Reps
Black Lug Bolts
225/45r19 General G-Max AS03

Winter Set:
16x7 Silver MSW Type 14 Plasti-dipped Cobalt Blue
215/65r16 General Altimax Artic

Brakes/Hub/Spacers:
Black Zinc eLINE Diamond Slotted Rotors - Front and Rear
Akebono Ultra-Premium Ceramic Brake Pads - Front and Rear
70mm Stud Conversion Kit - Front and Rear
Ball Seat and Conical Seat Lug Nut full sets for new Studs
12.5mm Hubcentric ECS Tuning Spacers - Front and Rear

Engine/Engine Bay/Exhaust/Brakes:
APR Stage II+ Tune - Stock(non Test-Pipes File)/93TP/100TP/Valet
ModShack VTDA TSI Intake
Forge TSI Catch Can Kit
Custom Blue Painted Engine Cover with extended notch cut out
Custom Blue Painted Battery Cover
Custom Blue Painted VTDA Air Diverter Cone.
Weather-Stripping Hood Mod
Techtonics Tuning 2.5" SS Race Downpipe - single cat
Techtonics Tuning 2.5" SS Straight Mid-Pipe
Techtonics Tuning 2.5" SS Axle-Back Exhaust
Custom aluminum spacer bushings for the center cross member to accommodate larger exhaust
**SPULEN Dog Bone Engine Mount Insert

ICE and Interior:
ProClip Phone Mount with 2 different universal phone holders.
Steering Column Mounted Single Offset Gauge Pod
Autometer Boost/Vacuum Gauge with Red Backlight
Chrome Trimmed Euro Light Switch w/o Auto
LED Dome Lights
LED Rear Headliner Lights
LED Trunk Lights
Ross-Tech Micro-CAN Interface cable
Cobra IRAD105 iRadar

VAGCOM Mods:
Windows Up/Down with Key-Fob
Fog Lights as DRL's
Cold Diagnostics Turned off for LED License Plate Bulbs
PWM bit for LED License Plate Bulbs

** = In Progess/Not Installed Yet
 
See less See more
20
#91 ·
Had a busy weekend, installed coil-overs on the Tig yesterday and my catch can kit today. I updated the first post and I will be posting new pics soon.

For anyone interested I will also be posting up an Install/Guide/Reference thread regarding the CO install since there really aren't any specific to the Tiguans.
 
#92 ·
Man I really need to update this more often...

Anyway, here is the install review thread I did of the coil-overs in case anyone missed it and was looking forward to it:

http://forums.vwvortex.com/showthre...r-Install-and-Walkthrough-WARNING-PHOTO-HEAVY!!!

As for updates, I emptied my catch can about 2 or so weeks ago and it was naaasty and full, had to also put about 3/4 of a quart of oil back in my engine.

Fiddled once or 3 times with the ride height and I have it sitting where I want it for right now. I might get some different wheels down the road and if, I do, its going lower. :)

Other than that, i fixed a couple issues this evening, basically had to tighten up some bolts from the co install that came a little loose. Also replaced 2 subframe bolts with different ones that are thicker and dont shear on impact that have a higher tensile strength.

Everything has been pretty good with the tig, here are some pictures of it more recently:









 
#102 · (Edited)
Updated my first post with some recent additions. Here is what was added and changed :)

Exterior Aesthetics:
VW Emblem PlastiDipped Black - Front
VW Emblem PlastiDipped Black with Carbon Fiber "backlay" - Rear
8000K HID Fog Lights
OEM Projector Fog Light Housings
LED Parking/City Lights
LED License Plate Lights

Engine/Engine Bay/Exhaust:
APR Stage II+ Tune - Stock(non Test-Pipes File)/93TP/100TP/Valet

ICE and Interior:
LED Dome Lights
LED Rear Headliner Lights
LED Trunk Lights
Cobra IRAD105 iRadar

VAGCOM Mods:
Cold Diagnostics Turned off for LED License Plate Bulbs
PWM bit for LED License Plate Bulbs
 
#104 ·
I love it, I have had it for awhile now just totally forgot to add it to my list. Although recently I had to get my stock mapping altered for emissions because the first stock program I had was a Test Pipe Stock file so I still would not have passed in NY. All I did was email APR and they made a non TP file for me in like a day, got it flashed in 5 min at the guy I first got my tune at and I was good to go. All this power really makes me want to go K04 haha
 
#109 ·
hey tiggy

the back to black will not work, it will go on stay black but as soon as u wash it, it goes back. So what I came across is stuff called nuvinyl. does the same thing but does not fade again, i will be putting it on a truck this weekend ill take before and after pics of it as well. If you need some tiggy let me know my old job sells it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top