Engine
------------
6 Speed manual transmission
Engine Bored and Stroked to 2.9L
Turbonetics "Ceramic Ball-Bearing" t04b turbocharger (brand new w/ engine build)
JE Forged Turbo Pistons (Low Compression)
Eurospec 4340 Forged Lightweight Connecting Rods
60 lbs/hr. (630cc/min) Hi-Impedance Large Injectors
Short Ram K&N Intake
High Volume, High Efficiency Front Mount Intercooler
Turbosmart Manual Boost Controller
Stainless Steel Dump Tube
Custom Fabricated Test Pipe (removed Catalytic Converter)
*High Volume Catalytic Converter is boxed and available
*Post cat 02 sensor mod installed
EIP Stage III Engine Management (utilizing 60lb injectors)
EIP 2.5in full SS dual tip exhaust
EIP 2.5in down pipe
EIP Ultra high grade stainless steel exhaust manifold
EIP High Strength / Low Vibration Motor Mount
EIP Strut Caps
Fully coated mandrel bent piping set
Classic Greddy TYPE "S" Blow Off-Valve
New OEM Oil Pump & Water Pump
Stage II Bosch Upgraded Fuel Pump
Suspension & Wheels
------------------------------------
19in Axis Mod se7en rims (w/ brand new center-caps 4/3/08)
Front Tires: Nexen N3000 - low pro. (good tread as of 12/23/08)
Rear Tires: Hankook Ventus k104 Sport - low pro. (good tread as of 12/23/08)
Eibach Pro Springs (1.5in drop)
Eibach Pro Dampeners
Brembo drilled & slotted rotors
Hawk Performance Ceramic brake pads
Audio
------------
JBL 1500-Watt Amplifier
Dual 12in Pioneer Premier subs in closed box
Rockford Fosgate 1-Farad Capacitor
Kenwood Excelon 817dvd w/ 5.1 surround sound & remote control
Alpine single-DIN center channel 5.1 surround sound speaker
Pyramid 160-Watt Amp (dedicated for alpine center speaker)
iPOD to Kenwood DVD touch screen interface device
Monsoon Speakers & Amplifier
Security
------------
Viper Alarm System
Two-way pager/transponder with half-mile range
Glass breakage alarm module
Shock sensor alarm module
Remote window roll-up/down module
Remote start & turbo-timer module (Needs Install - Plugs into Viper System)
Interior
------------
Center Steering Column VDO Boost gauge (dash color matched)
OEM Snap-in Brushed Aluminum Dash Kit (only center console)
GLI Sport Bucket Seats (dual tone - textured cloth)
Front/Rear Heavyweight Monster Mats
OBDII Engine Code Scanner
Exterior
------------
Custom Eurogear Carbon/Kevlar Bowser Hood (Black & Red tight weave)
*Hood sides painted tornado red to line up with grill
*Update 8/6/08 Put Stock Hood/Grill Back on
*Update 12/22/08 Carbon-Bowser Hood - SOLD
Kamali Badge-less grill
Clear Side Markers
Tinting by EIP
Shaved Trunk VW Emblem
De-badged all trunk lettering
Solid Trunk fitted with dynamat extreme (sheets and foam filler)
2005 red/clear OEM tail lights
Molded Rear Bumper / Quarter Panel
Molded Front and Rear valiances
Dubtechnik Side Skirts (brand new & unpainted sitting in garage / included)
Custom Front Bumper (cut/molded to show intercooler)
My youtube page.....
http://youtube.com/profile_vid...e&p=r
-
-
-
----- SOLD ----- 5/28/2009 ----- SOLD ----- 5/28/2009 ----- SOLD ----- 5/28/2009 ----- SOLD ----- 5/28/2009 -----
-
-
-
Modified by envisionmore at 3:15 PM 5-28-2009
Post Title:
Posted by: Sid-Rage at 5:54 PM 2-11-2007
350z, g35, wrx, srt4... all love the look of this car's tail lights...
Post Title: Re: (Sid-Rage)
Posted by: IDdubber at 6:56 PM 2-11-2007
more pics anywhere?
Post Title:
Posted by: envisionmore at 7:40 PM 2-11-2007
Ive drove dozens of BT 1.8T's and some turbo VR6's and this one has the nastiest powerband. Slipping the clutch with no gas is flawless, burying the gas is not required in everyday driving, but when someone's mouth gets a little too big......
Jon, send more pix of girlfriend.
Post Title: Re: (ricecopvwdave)
Posted by: bryan burnick at 9:23 PM 2-11-2007
| Quote, originally posted by IDdubber » |
| If I had the cash I'd have no problem offering $21k-$25k for your car. clean, simple, power out the you know what....easily a $20k+ car. more pics anywhere? |
lol well that sounds like u like to through away your money... paying what he is asking ... sounds ok
Post Title:
Posted by: ricecopvwdave at 12:30 PM 2-12-2007
^^ video of my exhaust in neutral ^^
tomorrow ill upload an engine view...
its nearly 5am.. I'm going to sleep
g'night.
Post Title: Re: Feeler : 24v 2.9L Stage3 VRT (envisionmore)
Posted by: envisionmore at 4:59 AM 2-13-2007
side profile
Post Title: Re: Feeler : 24v 2.9L Stage3 VRT (envisionmore)
Posted by: envisionmore at 2:12 PM 2-13-2007
^^^ video of engine in neutral ^^^
Post Title: Re: (envisionmore)
Posted by: ricecopvwdave at 8:07 PM 2-13-2007
| Quote, originally posted by envisionmore » |
| I haven't put an asking price just yet because I'm debating whether or not to keep it.... I do have a lot of bills piling up so I just wanted to see if people are interested. I might sell it if someone makes me a decent offer. Anyone who wants to test drive lemme know, this car will leave a lasting impression. I live in West Palm Beach, FL. |
"It feels just as fast as I remember"
"No, its faster.....that was only half throttle."
Post Title: Re: (ricecopvwdave)
Posted by: envisionmore at 11:52 PM 2-13-2007
This dyno is is just after EIP install as Stage I @10psi.. :::: SEE NEXT PAGE FOR POST ENGINE BUILD DYNO ::::
Modified by envisionmore at 4:34 PM 2-23-2009
Post Title:
Posted by: Matt@EuroJerks at 12:48 PM 2-14-2007
| Quote, originally posted by envisionmore » |
| ...and still at 10psi! Still breaking in the engine easy.. I'm going to wait another 500-1000 miles to turn up the boost I little more. Thanks again buddy, you really did a great job.... |
Remember what I told you. If you want to turn up the boost to add alcohol injection.
Post Title: Re: (ricecopvwdave)
Posted by: VR6 24v at 7:03 AM 2-15-2007
Drool ...
Umm, I'll trade you my stock 03 GLI VR6 24v............. first born..........my whinny azz dog that's been pissing me off lately............ooh, and an original hubcap from my old 69 Dodge Coronet 440 project car. 
Bump for a sweet a** car......wish I could afford another car. 
Post Title:
Posted by: 5speedsteve at 12:21 PM 2-18-2007
I WANT MY DAMN MK2!!!
Post Title: Re: (Sid-Rage)
Posted by: RTCustomz at 12:34 AM 2-19-2007
he's open to stocky trades.. hit him up.. he might suprise you
Post Title:
Posted by: jchipperg at 7:53 PM 3-1-2007
was just driving this sick machine of a car.. as soon as that wastegate starts roaring... it's nasssssssssssssssssty...
Post Title: Re: (Sid-Rage)
Posted by: 5speedsteve at 1:50 PM 3-6-2007
Yo Danny whats up its Rob
Modified by BlackJettaT at 11:45 PM 3-7-2007
Post Title:
Posted by: Sid-Rage at 6:38 PM 3-6-2007
this car looks sick
Modified by BlackJettaT at 4:08 PM 3-10-2007
Post Title: Re: Feeler : 24v 2.9L Stage3 VRT (envisionmore)
Posted by: VR6SPLYT1 at 6:12 PM 3-9-2007
thatoneguy3000@hotmail.com
Post Title: Re: (VR6 ICEMAN)
Posted by: Sid-Rage at 1:11 AM 10-18-2007
| Quote, originally posted by VR6SPLYT1 » |
| How much, if you are going to sell???? |
| Quote, originally posted by 1.8Tspeed! » |
| your still not running eip software with that new motor are you? and if not what software are your running... and also why did you go to the new motor? did the old one blow? |
2nd question.. yes, first engine blew unfortunately.
1st question.. yes, ECU was re-flashed with stgIII software from eip after engine build and it runs great now.
Post Title: Re: Feeler : 24v 2.9L Stage3 VRT (envisionmore)
Posted by: 1.8Tspeed! at 12:16 AM 11-16-2007
| Quote, originally posted by envisionmore » |
2nd question.. yes, first engine blew unfortunately. |
yea.... i would definitely recommend you get new software before your built motor takes a crap... i had their "stg III" software.. haha now i have a new euospec bottom end and c2 software so it WONT blow again.. eip is out of business and their software is as good as the toilet paper i can find at a high-school .. that stg III u supposedly have is crap no matter how good u think it runs.. you should get a wide band.. ...that'll show you how good it's running
neways I'm just letting you know the dangers of your tune.. and your selling it so hopefully it will last until it's sold
GOOD LUCK with sale. awesome car just needs new engine management software
Modified by 1.8Tspeed! at 12:17 AM 11-16-2007
Post Title: Re: Feeler : 24v 2.9L Stage3 VRT (1.8Tspeed!)
Posted by: envisionmore at 12:51 AM 11-23-2007
| Quote, originally posted by 1.8Tspeed! » |
GOOD LUCK with sale. awesome car just needs new engine management software
|
Thanks for the comment & I sympathize with your situation. Ideally, this car could use stand-alone engine management.. This will be my next major upgrade if nobody wants it. As far EIP software goes, I have had 0 problems with this ECU. Most of the problems associated with turbo charged applications come from your individual setup. It’s important that you communicate with the people tuning your car on what you have and what your objectives are. It’s easy to blame a company which sets up the computer that determines how your car runs. Don’t get me wrong, EIP has their fair share of issues, but I have been pleasantly surprised ever since I got my car back from engine build.
Post Title: Re: FS - 2003 24v 2.9L STGIII VR6 Turbo (envisionmore)
Posted by: IIsides at 11:58 PM 11-23-2007
i might get yours if you still have it by thensad sight to see it go </3
-dg
Post Title:
Posted by: FamousEric at 1:12 AM 12-1-2007
just curious, did you ever snag the dyno chart for your stg 3 setup? 310 on stg 1 is amazing . . I can't imagine what it would be like with that much power! You definitely earn my #1 as an influence to my 24v if I ever decide to add power to it in the future.
Post Title: Re: Feeler : 24v 2.9L Stage3 VRT (envisionmore)
Posted by: realityking at 6:10 AM 12-21-2007
You may not take me seriously at the moment, when you first read this, but I'm completely up to purchase this vehicle from you. 20k, no problem, it's such a great car to see someone lose, and you've spent numerous hours into it, i can tell. Which is always greatly appreciated.
I'm from Chicago, and i'm highly interested in purchasing it. I hope that me being from Chicago does not disqualify me for any reasons to not be able to purchase the jetta.
I'll 0ffer some good money for it.
You can continue to keep in contact with me, if you do read this hopefully you will, via the following methods.
AIM (aol instant messenger) : iamcojones
Email: ramwill.18@gmail.com
MSN messenger: pleaddesigns@gmail.com
As I mentioned, I'm highly interested in this vehicle. Hope to hear from you soon.
Post Title: Re: (nokVR6)
Posted by: envisionmore at 10:09 PM 12-21-2007
| Quote, originally posted by nokVR6 » |
| bump because I can't believe this is still for sale and I just found your videos again on YT. just curious, did you ever snag the dyno chart for your stg 3 setup? 310 on stg 1 is amazing . . I can't imagine what it would be like with that much power! You definitely earn my #1 as an influence to my 24v if I ever decide to add power to it in the future. |
I've been reluctant to dyno it because I'm still on the stock clutch. It holds fine at 15psi but 20+ starts to slip. I will get it dynoed if someone is truly interested in buying but until then I’m waiting until I get a stgIII clutch and ease it in. Thanks for the props buddy! 
Post Title: Re: Feeler : 24v 2.9L Stage3 VRT (realityking)
Posted by: envisionmore at 10:12 PM 12-21-2007
| Quote, originally posted by realityking » |
| Its' been almost a month since your last post here, I'm hoping you check up on this thread often. You may not take me seriously at the moment, when you first read this, but I'm completely up to purchase this vehicle from you. 20k, no problem, it's such a great car to see someone lose, and you've spent numerous hours into it, i can tell. Which is always greatly appreciated. I'm from Chicago, and i'm highly interested in purchasing it. I hope that me being from Chicago does not disqualify me for any reasons to not be able to purchase the jetta. I'll 0ffer some good money for it. You can continue to keep in contact with me, if you do read this hopefully you will, via the following methods. AIM (aol instant messenger) : iamcojones As I mentioned, I'm highly interested in this vehicle. Hope to hear from you soon. |
Just shot you an e-mail with my cell phone number and added you to my AIM. My screenname is "envisionmore"
Post Title: Re: (envisionmore)
Posted by: nokVR6 at 11:50 PM 12-26-2007
| Quote, originally posted by envisionmore » |
I've been reluctant to dyno it because I'm still on the stock clutch. It holds fine at 15psi but 20+ starts to slip. I will get it dynoed if someone is truly interested in buying but until then I’m waiting until I get a stgIII clutch and ease it in. Thanks for the props buddy! |
Modified by envisionmore at 11:35 AM 3-5-2008
Post Title:
Posted by: nrage123 at 5:06 PM 3-5-2008
.jpg)
.jpg)
Modified by envisionmore at 8:05 PM 3-14-2008
Modified by envisionmore at 8:05 PM 3-14-2008
Post Title: Re: (envisionmore)
Posted by: mujjuman at 4:35 PM 3-15-2008
| Quote, originally posted by danjoekir » |
| this still alive? |
yeah lol 1 year later
Post Title:
Posted by: envisionmore at 4:37 PM 3-30-2008
Modified by envisionmore at 1:19 PM 4-3-2008
Post Title: Re: (envisionmore)
Posted by: mujjuman at 4:57 PM 3-30-2008
| Quote, originally posted by leperkuan » |
| does the chick come with the car? |
...for the right price
Post Title: Re: (envisionmore)
Posted by: mujjuman at 10:46 PM 4-3-2008
| Quote, originally posted by envisionmore » |
...for the right price |
| Quote, originally posted by Wicked Black Bunny » |
| Do want. Where in Florida are you? |
West Palm Beach -- Right off of i95 @ Southern Blvd, near the Palm Beach International Airport.
561 214 3697
Modified by envisionmore at 3:19 PM 3-18-2009
Post Title: Re: (envisionmore)
Posted by: envisionmore at 10:21 AM 4-18-2008
| Quote, originally posted by jinxpjh » |
| sorry to bother you but what size injectors did you get with the eip stage 2 fueling kit what boost are you running and did you dyno yet we talked on are cells a while back you were going to take me on a ride but i got the eip stage 2 and working on getting a few more hp&tq out of her i have the stage 2 fueling kit but cant remember what size injectors thay are. i don't know if i need to get larger injectors or just better software and also just received my c2 sri in the mail waiting for some time to install . thanks for any input hope we can meet up one day soon for some Modified by jinxpjh at 12:18 AM 4-23-2008 |
Whats up bro, your car looks super clean! I'm running at 15psi right now but when I want to play rough I turn it up to 20psi. No up-to-date dyno yet.... As far as injectors go I have the 60 lbs/hr. (630cc/min) Hi-Impedance set. You definitely want to upgrade your injectors, install that fueling kit and get rid of that rising rate fuel pressure regulator. I noticed a HUGE difference in doing so. Lemme know how that c2 short runner treats you. If i don't sell the car thats my next buy. Give me a ring sometime (561) 214 3697
Post Title: Re: (envisionmore)
Posted by: envisionmore at 9:33 AM 5-11-2008
60-140mph @ 17psi
http://youtube.com/user/envisionmore
19in wheels, two 12in subs & amps, 2 1/2in exhaust, the passenger filming along with stock clutch & intake manifold aren't helping me, but its still pretty quick regardless.
Modified by envisionmore at 10:00 AM 5-11-2008
Post Title: Re: (envisionmore)
Posted by: patsy630 at 10:23 AM 5-11-2008
| Quote, originally posted by patsy630 » |
| what gear did you do that 60-140 pull in |
That was all 5th gear. 6th gear on this car is only good for (a) saving gas on the highway or (b) 140mph+
| Quote, originally posted by jinxpjh » |
| that's how he probably blew his last intake manifold.lol |
Actually Petter, I blew my last one at 10psi when it was still stage1 setup. It wasn't the boost pressure at fault. I had just bought the car up in Maryland (very cold) and had a long drive all the way to South Florida (very hot), pulling hard on just about everyone that wanted to play along the way.
Now with a built motor, I put it on 20psi every once in a while and the stock manifold holds it so long as you don't over-do it. After-market short runner is definitely high on my wish list though. ....Care to donate yours??
Post Title: Re: (envisionmore)
Posted by: jinxpjh at 12:25 AM 5-12-2008
and lucky you didnt go to the mk5 shoot out.it got rained out .but we still got to meet soon. i work in boca on glades so if your ever around call me up
http://forums.vwvortex.com/zerothread?id=3834271
Modified by jinxpjh at 12:28 AM 5-12-2008
Post Title:
Posted by: envisionmore at 6:20 PM 5-31-2008
| Quote, originally posted by OhHiRobot » |
| Beautiful car! Love the color. |
Thanks for the compliment.
Post Title: Re: FS - 2003 24v 2.9L STGIII VR6 Turbo (envisionmore)
Posted by: kx250f08 at 12:35 PM 6-19-2008
Post Title:
Posted by: envisionmore at 12:04 AM 8-6-2008
I put the stock hood back on:
FS: Mk4 jetta carbon-fiber/kevlar bowser hood (red/eurogear)
& Kamali badge-less grill (located in west palm beach, fl)
pictures on page one of this thread... pm me if interested!
*** BOWSER HOOD SOLD ***
Modified by envisionmore at 2:52 PM 12-24-2008
Post Title:
Posted by: envisionmore at 7:03 PM 8-14-2008
Guess I have to deal with my 2000 GLS VR6 12v 
Post Title: dyno
Posted by: envisionmore at 6:50 PM 9-3-2008
video: http://www.youtube.com/watch?v=wt3wwTZ_mdA
The audio on this crappy cam does it no justice.. this thing sounds like a jet engine. Also it was dyno day and they had a DJ blaring music.
Post Title:
Posted by: Sid-Rage at 1:29 AM 9-4-2008
get this damn thing sold!
Post Title:
Posted by: PanCubano at 4:51 AM 9-4-2008
| Quote, originally posted by PanCubano » |
| What are you looking to trade for? And how stock is stock for you? From reading some post and stopping at pg. 2, sounds like you want a stock car. |
Like you said.. I need a stock car (as in something low-key and cops don't single out). The other reason is for cash. I have about 6k in credit card debt that I need to eliminate.
Post Title:
Posted by: PanCubano at 2:55 PM 9-4-2008
| Quote, originally posted by PanCubano » |
| Well my car isn't stock but doesnt stand out. Stock rims we're painted black, muffler has a resonator and isn't very loud. Has revo stg 2 also. Only down side is that its Auto. So if anything Im wasting my time and hoping for some luck. Lol. |
Is hialeah anywhere near west palm beach? Id like to take a look.
Post Title:
Posted by: DubZmk3VR at 6:34 PM 9-4-2008
I was just wondering if it was still for sale, if so i might be interested in it. | Quote, originally posted by PHDubs.:R32 » |
| Bump on the sick car... I was just wondering if it was still for sale, if so i might be interested in it. |
yep!
aim: envisionmore
email: questiontheride@gmail.com
phone: 561 214 3697
Modified by envisionmore at 3:20 PM 3-18-2009
Post Title: Re: (envisionmore)
Posted by: PHDubs.:R32 at 8:15 PM 9-6-2008
| Quote, originally posted by fibes » |
| If I can sell my s4, I am pursuing your vrt!! Very, very, nice! |
Thanks buddy
Post Title:
Posted by: Sid-Rage at 9:17 PM 9-14-2008
| Quote, originally posted by PanCubano » |
| Still want to trade for my stock car?? |
As much as I like your car I have to decline.
Financial circumstances have changed and I need a car and at least $5k cash that I can put towards my credit card debt.
Post Title:
Posted by: PanCubano at 9:54 AM 10-3-2008
Post Title: Re: FV-QR (Bdfrd 24v)
Posted by: vrcabby at 12:02 PM 10-16-2008
| Quote, originally posted by nofxskat » |
| is this still for sale? |
yep
Post Title: Re: (envisionmore)
Posted by: envisionmore at 4:53 PM 12-18-2008
my brother is selling his suped-up jetski for a ridiculously low price ($1500 Firm)... Trailer is included!! if your interested.....
email him: help@creditagenda.com
or on AIM: coreygray1247
1997 Yamaha Waverunner GP1200
* --- 1/1/09 - SOLD --- *
Modified by envisionmore at 10:54 PM 1-1-2009
Post Title:
Posted by: nofxskat at 11:46 PM 12-20-2008
| Quote, originally posted by Bad Baby » |
| i will trade u my stock 05 jetta mmmmm ur car makes me hawt........ |
Thanks for the offer but I'm looking for trade/cash at the moment.
Nice e-mail on your profile, lol: "Kinkysextoys3@aol.com" 
Post Title:
Posted by: vdubin15 at 12:14 PM 1-1-2009
| Quote, originally posted by vdubin15 » |
| such a sick ass car and you have a set of monte carlos on it???? im dissapointed.....o yeah, does the girl come with the car too? |
Those pics on the first page are older. Right now it has a set of axis mod7 rims. lol, your the third person to ask me if the girl comes with it.
Post Title: Re: (envisionmore)
Posted by: louisvanwilker at 6:42 PM 1-3-2009
| Quote, originally posted by louisvanwilker » |
| does the girl come with it |
..guess that depends on if you live in orlando and how you treat her
Post Title: Re: (envisionmore)
Posted by: OsirisMajor at 7:28 PM 1-3-2009
| Quote, originally posted by OsirisMajor » |
| PM Sent! |
..replied
Post Title: Re: (envisionmore)
Posted by: split71 at 6:00 PM 1-4-2009
| Quote, originally posted by envisionmore » |
..guess that depends on if you live in orlando and how you treat her |
Oh reaally? 
Post Title: Re: (Sid-Rage)
Posted by: andy'sgti03 at 10:31 PM 1-5-2009
)..
| Quote, originally posted by vdubfan71 » |
| omg i cant even explain to you how much i want this car, i hav all of ur pics lol its my wallpaper for everything, and i have print-outs of it in my room.(lol i DONT have a problem) if i can get the money for this car i will take such good care of it. its the most perfect awesomest car ever! |
_____________________________________________________________________________________________ ^ Page Five is L33T
Post Title: Re: pics (envisionmore)
Posted by: vdubfan71 at 2:42 PM 1-8-2009
| Quote, originally posted by Sosl0w » |
| I'm not sure how your running 20psi on the stock intake mani....ever. Its not made to handle more than 12psi, so i would say your really lucky. You should probably tell people that are interested. As anyone who hasn't built one and buys this car will most likely turn it right up to 20 and beat on it immediately blowing the intake mani. Car needs a short runner to run reliably over 12psi. Not trying to be a dick, just letting people know. |
You are absolutely right about switching the intake manifold (I mentioned it in the good/bad section on page one). Believe it or not, I actually blew my first intake manifold @ 10psi when I first got the car, driving from MD to FL but I pushed it way too hard.
This car has been at 15psi steady for the past year on the stock intake manifold & stock clutch with no problems (a couple people have told me it rides better than a stock 24v).
I think with the intake mani, it is more of a heat issue more-so than air pressure. The stock manifold has excellent airflow characteristics but the two-piece design it crap when it comes to heat expansion.
It really boils down to how you drive the car. It has only seen 20psi twice --- curiosity almost killed the cat, again
Thanks for the input
Here is a link to a youtube clip of me going 60-140mph @ 17psi: http://www.youtube.com/watch?v...lated
Post Title: Re: pics (vdubfan71)
Posted by: envisionmore at 8:04 PM 1-8-2009
| Quote, originally posted by vdubfan71 » |
| hey just so ya kno i did send u an e-mail. also i havent said it but im seriously looking at getting this car but it"ll be a couple months if thats ok. |
Sent PM
Post Title:
Posted by: OsirisMajor at 4:50 AM 1-9-2009
super sleeper and this thing murders almost anything that pulls up next to it..
love those people who laugh at the..
" you wanna try and run me in a jetta? haha "
this car makes them scared of saying that after they met this car haha
Post Title: Re: (BlackJettaT)
Posted by: DerekDTP! at 4:47 PM 1-14-2009
| Quote, originally posted by DerekDTP! » |
| 11-12k cash?? |
throw in a $3k car and you got a deal
Post Title: Re: (envisionmore)
Posted by: DerekDTP! at 10:44 PM 1-14-2009
| Quote, originally posted by envisionmore » |
throw in a $3k car and you got a deal |
only if i had a car to throw in... 
lol
Post Title: Re: (DerekDTP!)
Posted by: kneedraggin101 at 11:38 AM 1-30-2009
-nice car btw
Post Title:
Posted by: hockeybm at 7:02 PM 2-6-2009
| Quote, originally posted by hockeybm » |
| Do you have any shots of your trunk |
Modified by envisionmore at 11:20 PM 2-20-2009
Post Title: Re: (envisionmore)
Posted by: mazmac24 at 1:52 AM 2-21-2009
| Quote, originally posted by crazy4myvw » |
| this happened while looking at this car. http://www.youtube.com/watch?v=4pXfHLUlZf4 |
That video is cracked me up!
Post Title: Re: (envisionmore)
Posted by: SoFloGLI at 6:40 PM 2-28-2009
Bump for west palm.
Post Title:
Posted by: imnidiot81 at 10:52 AM 3-4-2009
| Quote, originally posted by imnidiot81 » |
| I don't understand how your car isn't making that much power?! I'm on 8.5 to 9psi And Im making 300whp. On 20psi my car is making almost 500whp. I know when I get a better tune I make 500 maybe better. I've read your setup alot and I don't get it... You have the same motor I do. maybe it's because my turbo is bigger? But dude your car is super clean. If you wanna do a trade please let me know I want a four door.. lol |
The power is there but getting that power to the ground is what is holding it back. You have to remember this car still has original clutch & intake manifold. It made 318whp at 10psi and that was at STG1 before any internals. 364whp on stock essentials & no LSD is not bad. Add a couple hard parts and this car would make around 500whp no problem.
Post Title: Re: (envisionmore)
Posted by: imnidiot81 at 9:32 PM 3-4-2009
I've had this as my unlock screen on my iPhone for nearly a year
ooh!!! and can i have the hi-res ones too!!!!
danjoekir (at) yahoo (dot) com
Modified by danjoekir at 6:37 PM 3-15-2009
Post Title: Re: (danjoekir)
Posted by: envisionmore at 10:29 PM 3-15-2009
| Quote, originally posted by danjoekir » |
ooh!!! and can i have the hi-res ones too!!!! |
sure thing.... it can be found here
It fits nice in the iphone.. I'm going to have to try that!
Post Title: Re: (imnidiot81)
Posted by: envisionmore at 10:56 PM 3-15-2009
| Quote, originally posted by imnidiot81 » |
| I here you on getting it to the ground. I'm going back to the dyno on Friday. To hopefully get good numbers and not spin off of the dyno. Everytime I get up around 5200rpm's it wants to walk all over the dyno. Goodluck man on the sale of this beast. hey if you wanna put a lil more money into it I have a hpa intake manifold and a brand new Euro Spec Stage 4 Clutch. I would love to see your car in person. If you ever come up to Va. you gotta let me know. But I'm not kidding I'd trade you my golf for your jetta. lol... |
Sent PM
Post Title:
Posted by: imnidiot81 at 10:36 AM 3-19-2009
| Quote, originally posted by imnidiot81 » |
| Hey when do you want to trade me??? lol. I want your jetta. |
Possibly... I'd love to see your car in person.
Post Title: Re: FS - 2003 24v 2.9L STGIII VR6 Turbo (envisionmore)
Posted by: poopsnpees at 5:53 PM 3-22-2009
| Quote, originally posted by vroomvroom-vw » |
| hey im looking at putting a GT3528R turbo on my 24v vr6 do you have any tips for me or just general things im gonna go big on mine and try to get 500hp to the wheels if possible. so any help or hints would be great! |
Save yourself a lot of time and money.. Buy Mine
Post Title: Re: (TDI_chris)
Posted by: envisionmore at 12:56 PM 4-8-2009
| Quote, originally posted by TDI_chris » |
| if i can get rid of this damn rabbit, i'll probably end up buying this, unless you intrested in a trade? |
Possibly... But Cash is King...
Send me pics and more info: broadmind@bellsouth.net
Post Title: Re: (WombRaider)
Posted by: envisionmore at 12:57 PM 4-8-2009
| Quote, originally posted by WombRaider » |
| checked out the youtube videos. looks powerful. nice work. g/l with sale! |
Thanks!
Post Title: Re: (JAG822)
Posted by: envisionmore at 12:57 PM 4-8-2009
| Quote, originally posted by JAG822 » |
| PM sent |
Replied
Post Title: Re: (envisionmore)
Posted by: TDI_chris at 4:47 PM 4-9-2009
| Quote, originally posted by envisionmore » |
|
|
free bumb for the sexy g/f
Post Title: Re: (envisionmore)
Posted by: vrcabby at 4:30 PM 4-30-2009
| Quote, originally posted by 4RabitzDeep » |
| Hey I m Looking into buying a car and i am comming into some cash. How much r you selling this for now? |
pmed
Post Title:
Posted by: imnidiot81 at 8:39 AM 5-9-2009
| Quote, originally posted by imnidiot81 » |
| It'll never sale just like mine has not sold. When are you just going to keep it? |
I am ok with keeping it but if someone wants to take it off my hands at a great value than all power to them. I work from home so it is sitting in the garage collecting dust.
Someone might as well someone enjoy it.
Post Title:
Posted by: souparahman at 11:55 PM 5-10-2009
| Quote, originally posted by souparahman » |
| trade for Jdm right hand drive 1995 Toyota Aristo Twin turbo? |
Thanks for the offer but ill pass.. How about your GTI?
Post Title:
Posted by: souparahman at 10:04 PM 5-16-2009
| Quote, originally posted by souparahman » |
| Id be willling to do the gti but how much cash do you want on top? |
mileage...... pics?
broadmind@bellsouth.net
Post Title: Re: (envisionmore)
Posted by: souparahman at 9:43 PM 5-17-2009
| Quote, originally posted by envisionmore » |
mileage...... pics? |
Post Title:
Posted by: souparahman at 9:46 AM 5-18-2009
| Quote, originally posted by souparahman » |
| 82k miles, 1.8t, basically stock.. |
sorry bud.. pending sale out of the blue.
Post Title: Re: (envisionmore)
Posted by: envisionmore at 3:10 PM 5-28-2009
Modified by envisionmore at 8:26 PM 5-30-2009
Post Title: Re: (envisionmore)
Posted by: envisionmore at 8:24 PM 5-30-2009
| Quote, originally posted by kneedraggin101 » |
| so who bought her? |
Joshua Jeppesen in Colorado
Post Title: Re: (envisionmore)
Posted by: umop 3p!sdn at 2:06 AM 6-7-2009
| Quote, originally posted by envisionmore » |
|
|
post full res please!
congrats on the sale.
Post Title: Re: (umop 3p!sdn)
Posted by: envisionmore at 12:52 PM 6-7-2009
Here is the Hi-Res one.
Modified by envisionmore at 3:10 PM 6-7-2009
|
|