VW Vortex - Volkswagen Forum banner

New Product Development 2.5L L/W Single Mass Flywheel and Clutch kits , Shipped Ground Lower 48

67K views 64 replies 29 participants last post by  FourSeasonTuning.com 
#1 · (Edited)
Flywheel and Kits Below



FST 228MM L/W Single Mass Steel Billet Flywheel Includes Ring Gear $324.95 Shipped Ground

FST 228MM L/W Single Mass Steel Billet Flywheel Without Ring Gear $309.95 Shipped Ground

FST 228MM L/W Single Mass Alloy Flywheel Includes Ring Gear $389.95 Shipped Ground

FST 228MM L/W Single Mass Alloy Flywheel Without Ring Gear $369.95 Shipped Ground



FST 228MM L/W Single Mass Alloy Flywheel W/ Sachs VR6 Clutch Kit $559.95 Shipped Ground

FST 228MM L/W Single Mass Steel Billet Flywheel W/ Sachs VR6 Clutch Kit $499.95 Shipped Ground


FST 228MM L/W Single Mass Alloy Flywheel W/ Clutchnet Stage 2 VR6 Clutch Kit $749.95 Shipped Ground

FST 228MM L/W Single Mass Steel Billet Flywheel W/ Clutchnet Stage 2 VR6 Clutch Kit $679.95 Shipped Ground


FST 228MM L/W Single Mass Alloy Flywheel W/ Clutchnet Stage 3 VR6 Clutch Kit $759.95 Shipped Ground

FST 228MM L/W Single Mass Steel Billet Flywheel W/ Clutchnet Stage 3 VR6 Clutch Kit $694.95 Shipped Ground

OEM 2.5 Dual Mass Flywheel W/ Ring Gear 22.7 LBS
OEM Clutch Disc & Pressure Plate 10.1 LBS
Total Weight 32.8 LBS

FST Alloy Single Mass Flywheel/ Ring Gear 10.0 LBS
Sachs VR6 Clutch Disc & Pressure Plate 13.1 LBS
Total Weight 23.1 LBS

Total Overall Weight Reduction 9.7 LBS

By using a heavier Clutch Disc & Pressure Plate this will add 3 more
pounds to the Alloy flywheel (as compared to the OEM 2.5 Clutch Disc &
Pressure Plate ) making it feel like a 13 pound flywheel. This overall
weight reduction is 9.7 pounds. A steel version could be made if the
alloy one ends up being too light and or a heavier version is wanted.

Here are some examples of other weights of OEM Flywheels (Engines of
similar power)
All OEM Single Mass Cast VR6 12V flywheels are 17.75 pounds w/ ring gear.
Many users have switched to a L/W Steel Billet Flywheel that weighs in at 11.75 w/ ring gear fitted.
Also available are slightly heavier Cast steel Single Mass w/ ring gear at 13.80 pounds ( still lighter than stock).

MK4 1.8T W/ 5 speed users are changing the OEM DM 22 pound flywheel
and converting to A Single Mass as well.
Again using the same weight as a 12V VR6 single mass steel billet
flywheel that weighs in at 11.75 w/ ring gear fitted.Also available
are slightly heavier Cast steel Single Mass w/ ring gear at 14
pounds.Both of the these flywheels were created in the aftermarket as a
performance part designed for the Corrado G60 and are using the very
proven Sachs VR6 clutch kit ( this Sachs kit is rated to 250-275
Torque and takes more)

1.8T & 2.8 24V VR6 W/ 6 speed 02M 6 speed users are changing the OEM DM
26.5 pound flywheel to A Single Mass type as well. 16.5 single mass
steel billet w/ ring gear this takes 10 pounds off and does not chatter.

Clutch Kits without Flywheel

2.5L Stage 1 Clutch Kit $215.00 Shipped Ground ( Includes 228MM Sachs Pressure Plate, Sachs Sprung Hub Disc,Sachs T/O bearing. Rated at 275 TQ at flywheel.Must be used with FST228-2.5AFW.

2.5L Stage 1 Clutch Kit


2.5L Stage 2 Clutch Kit $375.99 Shipped Ground ( Includes 228MM Clutchnet Yellow Pressure Plate, Clutchnet Disc w/ Steel covered 6 spring Hub,Sachs T/O bearing and alignment tool. Rated at 375 TQ at flywheel.Must be used with FST228-2.5AFW.

2.5L Stage 2 Clutch Kit

2.5L Stage 3 Clutch Kit $554.95 Shipped Ground ( Includes 228MM Clutchnet Red Pressure Plate, Clutchnet Disc w/ Steel covered 6 spring Hub, Sachs T/O bearing and alignment tool. Rated at 445 TQ at flywheel. Must be used with FST228-2.5AFW.

2.5LStage 3 Clutch Kit

2.5L Stage 2X Kevlar Clutch Kit $445.00 Shipped Ground ( Includes 228MM Clutchnet Red Pressure Plate,Kevlar Clutchnet Disc w/ Steel covered 6 spring Hub, Sachs T/O bearing and alignment tool. Rated at 400 TQ at flywheel. Must be used with FST228-2.5AFW.

2.5L Stage 2X Clutch Kit

2.5L Stage 2X Fiber Carbon Clutch Kit $445.00 Shipped Ground ( Includes 228MM Clutchnet Red Pressure Plate,Fiber Carbon Clutchnet Disc w/ Steel covered 6 spring Hub, Sachs T/O bearing and alignment tool. Rated at 400 TQ at flywheel. Must be used with FST228-2.5AFW.

2.5L Stage 2X Clutch Kit





California residents will be charged 7.75 % sales tax.

The current site only has a fraction of the parts listed that we carry.Please contact us if the items you seek are not on the site. Competitive pricing, Fast shipping, If you see a lower price let us know, chances are we can work with you.

Questions at 714-997-5842 M-F 10-6 PST

Email is better than IM
sales(AT)fourseasontuning.com*

Thanks for looking.
James

AKA wld101turkey



Modified by FourSeasonTuning.com at 9:27 PM 4-5-2009
 
See less See more
9
#4 ·
Re: New Product Development 2.5L L/W Single Mass Flywheel and Clutch ... (FourSeasonTuning.com)

any 2.0T clutch kits?
 
#5 · (Edited)
Re: New Product Development 2.5L L/W Single Mass Flywheel and Clutch ... (becones)

The Mk5 2.0T kits are listed now. More on the site.

$1197.17 2.0T South Bend Clutch Stage 2 Daily KIT W/ 20 Lb Flywheel SBC Single mass steel billet 20 Lb,SBC Full face Organic Disc W/ Sprung Hub,Modified Sachs Pressure plate,flywheel & pressure plate bolts, OE release bearing and alignment tool.Rated at 400 TQ.

2.0T South Bend Clutch Stage 1

$1306.01 2.0T South Bend Clutch Stage 2 TZ KIT W/ 20 Lb Flywheel SBC Single mass steel billet 20 Lb,SBC Kevlar Disc W/ Sprung Hub,Modified Sachs Pressure plate,flywheel & pressure plate bolts, OE release bearing and alignment tool.Rated at 325TQ.

2.0T South Bend Clutch Stage 2 TZ

$1306.01 2.0T South Bend Clutch Stage Stage 2 Endurance (aka old 3 OFE KIT) W/ 20 Lb Flywheel SBC Single mass steel billet 20 Lb,SBC Full face OFE disc Dual sided W/ Sprung Hub,Modified Sachs Pressure plate,flywheel & pressure plate bolts, OE release bearing and alignment tool.Rated at 450 TQ.

2.0T South Bend Clutch Stage 2 Endurance
 
#12 ·
any info and idea if u sell a single mass flywheel/clutch to fit my mk4 golf engine code bde 2.8 v6 24v 2002 model, (240mm)fitted with the 02m 6speed , after something to suport 500bhp , just shipping im a bit worryd about ,
 
#13 · (Edited)
Re: (adaptorman)

We have a 02M for the VR6 that will support 450 torque. Shipping would be about $110
for 2 Large Flat Rate USPS 6-10 day service.
$1035.00 Clutchnet Stage 3+ CLUTCH KIT W/16.5lb flywheel FST Single mass Steel Billet 16.5 pound 240MM flywheel, 240MM CLUTCHNET 2,200lb modified Pressure Plate,Clutchnet Copper Feramic Steel covered Sprung hub Disc,flywheel & pressure plate bolts, OE release bearing.

CLUTCHNET STAGE 3+ Copper Feramic KIT
 
#17 ·
Re: New Product Development 2.5L L/W Single Mass Flywheel and Clutch ... (FourSeasonTuning.com)

I have about 7k miles on mine and I love it. I let it break in for 1,000 miles the slow started "testing" it. It feels so much better than stock. Like a totally dif car
 
#22 · (Edited)
Re: New Product Development 2.5L L/W Single Mass Flywheel and Clutch ... (FourSeasonTuning.com)

$674.95 OEM 2.0T FSI KIT W/ 19 Lb Flywheel FST Single mass steel billet 19 Lb,LUK Full face Organic Disc Dual Dampened,LUK Pressure plate,LUK release bearing. 6 Flywheel & Pressure plate bolts, and alignment tool.

OEM 2.0T FSI KIT W/ 19 Lb Steel Billet Flywheel
$674.95 OEM 2.0T FSI KIT W/ 9 Lb Flywheel FST Single mass Alloy 9 Lb, LUK Full face Organic Disc Dual Dampened, LUK Pressure plate,LUK release bearing. 6 Flywheel & Pressure plate bolts, and alignment tool.

OEM 2.0T FSI KIT W/ 9 LB Alloy Flywheel


Modified by FourSeasonTuning.com at 10:25 PM 4-17-2010
 
#23 · (Edited)
New items DXD/South Bend Clutch Kits Fits 2008.5 and Up TSI engines

***DXD/South Bend Clutch Kits Fits 2008.5 and Up TSI engines ***



$1197.17 STAGE 2 Daily Kit with 17lb flywheel DXD/SBC Single mass Steel Billet 17 pound 240MM flywheel, 240MM Pressure Plate,Sprung Hub Full face Organic/Metallic Disc, 8 flywheel & 6 pressure plate bolts, OE release bearing.

STAGE 2 Daily Kit 400TQ




$1306.01 STAGE 2 Endurance Kit with 17lb flywheel DXD/SBC Single mass Steel Billet 17 pound 240MM flywheel, Sachs Sport Pressure Plate,Sprung Hub Full face Organic/ OFE Metallic Disc, 8 flywheel & 6 pressure plate bolts, OE release bearing.

STAGE 2 Endurance Kit 450TQ




$1306.01 STAGE 2 Drag Kit with 17lb flywheel DXD/SBC Single mass Steel Billet 17 pound 240MM flywheel, Heavy Duty Pressure Plate modified for a puck style disc with no cushion between the linings to keep the clutch pedal travel short and quick, Six Puck Sprung Hub Disc, 8 flywheel & 6 pressure plate bolts, OE release bearing.

STAGE 2 Drag Kit 520TQ




$1496.47 STAGE 3 Daily Kit with 17lb flywheel DXD/SBC Single mass Steel Billet 17 pound 240MM flywheel, Sachs Sport Modified Pressure Plate, Sprung Hub Full face Organic Disc, 8 flywheel & 6 pressure plate bolts, OE release bearing.

STAGE 3 Daily Kit 470TQ




$1605.30 STAGE 3 ENDURANCE Kit with 17lb flywheel DXD/SBC Single mass Steel Billet 17 pound 240MM flywheel, 240MM Sachs Sport Modified Pressure Plate,KEVLAR Sprung Hub Full face Disc, 8 flywheel & 6 pressure plate bolts, OE release bearing.

STAGE 3 ENDURANCE Kit 485TQ




$1605.30 STAGE 3 Drag Kit with 17lb flywheel DXD/SBC Single mass Steel Billet 17 pound 240MM flywheel, 240MM Sachs Sport Modified Pressure Plate, Graphite impregnated Ceramic Six Puck Disc, 8 flywheel & 6 pressure plate bolts, OE release bearing.

STAGE 3 Drag Kit 575TQ
 
You have insufficient privileges to reply here.
Top