VWVortex.com - VCDS MKVI / MK6 Platform, Handy Coding tweaks
Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 43 of 54 FirstFirst ... 3339404142434445464753 ... LastLast
    Results 1,051 to 1,075 of 1331

    Thread: VCDS MKVI / MK6 Platform, Handy Coding tweaks

    1. Member
      Join Date
      Nov 30th, 2011
      Posts
      481
      Vehicles
      2012 Passat V6 SEL Prem/Nav; 2012 Tiguan SEL Prem/Nav
      12-20-2011 05:24 AM #1051
      KanDyWyTE.... that scan below... is that pre mod or post mod scan? I've done a few mods on my 2012 Tig SEL and had a question on one. Perhaps you, Dana, or any of the experts here can help??

      https://forums.vwvortex.com/showthrea...1#post75011290

      Saw your list and found a few I need to go back to do such as heater mem.

      But, what is the emergency brake lights/flasher tweak??.... gotta a link on reading material for that.... I missed it other readings.

      Quote Originally Posted by KanDyWyTe View Post
      So half my VCDS tweeks work and the other half DON'T! Has this happened to anyone? Is it because I have a brand new 2012 that requires a newer version (currently v11.11.0)?!

      Working tweaks:
      Seat-belt chime/light off
      Emergency brake lights/flashers (assuming this one works)
      Gauge Staging
      Seat heater memory
      Comfort Blinkers (highway) set to 4 blinks
      Remote Comfort Control of windows

      FAILED Tweaks:
      Windows operable once door is opened

      ***EDIT*** - THANKS TO Phtatz314's suggestions all works now except the window power cut off, which I will re-attempt as an individual bit selection,

      Here is my auto scan: I'm currently equipped with R-LED tail lights w/RF that I need to re-wire.

      VCDS Version: Release 11.11.0 (x64)
      Data version: 20111111

      Thursday,17,November,2011,23:51:50:33918

      Chassis Type: 7N0
      Scan: 01 02 03 05 08 09 15 16 17 19 25 2B 2E 37 42 44 46 47 52 55
      56 62 72

      VIN: WVWHV7AJ0CW079269

      01-Engine -- Status: OK 0000
      02-Auto Trans -- Status: OK 0000
      03-ABS Brakes -- Status: OK 0000
      04-Steering Angle -- Status: OK 0000
      05-Acc/Start Auth. -- Status: Malfunction 0010
      08-Auto HVAC -- Status: OK 0000
      09-Cent. Elect. -- Status: Malfunction 1010
      15-Airbags -- Status: OK 0000
      16-Steering wheel -- Status: OK 0000
      17-Instruments -- Status: Malfunction 0010
      19-CAN Gateway -- Status: Malfunction 0010
      25-Immobilizer -- Status: OK 0000
      2B-Steer. Col. Lock -- Status: Malfunction 0010
      2E-Media Player 3 -- Status: OK 0000
      37-Navigation -- Status: OK 0000
      42-Door Elect, Driver -- Status: OK 0000
      44-Steering Assist -- Status: OK 0000
      46-Central Conv. -- Status: Sporadic communication error 1000
      47-Sound System -- Status: OK 0000
      52-Door Elect, Pass. -- Status: OK 0000
      55-Xenon Range -- Status: OK 0000
      56-Radio -- Status: OK 0000
      62-Door, Rear Left -- Status: OK 0000
      72-Door, Rear Right -- Status: OK 0000

      -------------------------------------------------------------------------------
      Address 01: Engine (CCT) Labels: 06J-906-026-CCT.clb
      Part No SW: 1K0 907 115 AS HW: 1K0 907 115 AA
      Component: 2.0l R4/4V TFSI 0010
      Revision: AAH18--- Serial number:
      Coding: 0403010A1C070160
      Shop #: WSC 01357 011 00200
      VCID: 77D330E506D65B6

      No fault code found.
      Readiness: 0000 0000

      -------------------------------------------------------------------------------
      Address 02: Auto Trans Labels: 02E-300-0xx.lbl
      Part No SW: 02E 300 057 C HW: 02E 927 770 AL
      Component: GSG DSG AG6 511 2724
      Revision: 05351113 Serial number: 00001107200767
      Coding: 0000020
      Shop #: WSC 01357 011 00200
      VCID: 1917165DD082AD6

      No fault code found.

      -------------------------------------------------------------------------------
      Address 03: ABS Brakes (J104) Labels: 1K0-907-379-60EC1F.clb
      Part No SW: 1K0 907 379 BJ HW: 1K0 907 379 BJ
      Component: ESP MK60EC1 H31 0121
      Revision: 00H31001
      Coding: 114B600C49290003880D06EA92220041B70800
      Shop #: WSC 01357 011 00200
      VCID: 7BDB2CD5FAFE7F6

      No fault code found.

      -------------------------------------------------------------------------------
      Address 05: Acc/Start Auth. (J518) Labels: 5K0-959-434.clb
      Part No SW: 5K0 959 434 A HW: 5K0 959 434 A
      Component: VWKESSYPQ35GP 085 0802
      Revision: 00085000 Serial number: 0150371023
      Coding: 030C0C
      Shop #: WSC 01357 011 00200
      ASAM Dataset: EV_KESSY_PQ35GP A01018
      ROD: EV_KESSY_PQ35GP_VW36.rod
      VCID: 334BC4F59A2E776

      2 Faults Found:
      133124 - Function Restricted due to Missing Message(s)
      U1111 00 [008] - -
      Intermittent - Confirmed - Tested Since Memory Clear
      Freeze Frame:
      Fault Status: 00000001
      Fault Priority: 1
      Fault Frequency: 1
      Reset counter: 79
      Mileage: 1406 km
      Date: 2002.14.12
      Time: 20:51:55

      1069319 - Wake-Up Signal from Control Module for Access/Start Authorization
      U1093 00 [008] - Short to GND
      Intermittent - Confirmed - Tested Since Memory Clear
      Freeze Frame:
      Fault Status: 00000001
      Fault Priority: 2
      Fault Frequency: 1
      Reset counter: 79


      -------------------------------------------------------------------------------
      Address 08: Auto HVAC (J301) Labels: None
      Part No SW: 7N0 907 426 AN HW: 7N0 907 426 AN
      Component: AC Manuell H19 0304
      Revision: 00001015
      Coding: 0000001002
      Shop #: WSC 01357 011 00200
      ASAM Dataset: EV_ACManueBHBVW36X A01010
      ROD: EV_ACManueBHBVW36X_VW36.rod
      VCID: 8021DB391B189CE

      No fault code found.

      -------------------------------------------------------------------------------
      Address 09: Cent. Elect. (J519) Labels: 1K0-937-08x-09.clb
      Part No SW: 1K0 937 086 P HW: 1K0 937 086 P
      Component: BCM PQ35 M 110 0651
      Revision: 00110 AC
      Coding: 6F180A3B80272AC4108800C1700009444F052086574D8DB0E4 842024A040
      Shop #: WSC 01357 011 00200
      VCID: 3D5FE2CDA46AB16

      Subsystem 1 - Part No: 5K1 955 119 Labels: 1KX-955-119.CLB
      Component: Wischer 23071 26 0512
      Coding: 009795

      12 Faults Found:
      00984 - Left Tail Light (M4)
      010 - Open or Short to Plus
      Freeze Frame:
      Fault Status: 01101010
      Fault Priority: 2
      Fault Frequency: 158
      Reset counter: 69
      Mileage: 746 km
      Time Indication: 0
      Date: 2002.14.05
      Time: 16:51:24

      Freeze Frame:
      Term 15 Off
      Voltage: 12.50 V
      OFF
      ON
      Term 50 Off
      OFF
      OFF

      00985 - Right Tail Light (M2)
      010 - Open or Short to Plus
      Freeze Frame:
      Fault Status: 01101010
      Fault Priority: 2
      Fault Frequency: 158
      Reset counter: 69
      Mileage: 746 km
      Time Indication: 0
      Date: 2002.14.05
      Time: 16:51:24

      Freeze Frame:
      Term 15 Off
      Voltage: 12.50 V
      OFF
      ON
      Term 50 Off
      OFF
      OFF

      01518 - Bulb for Back-Up Lights; Left (M16)
      010 - Open or Short to Plus
      Freeze Frame:
      Fault Status: 01101010
      Fault Priority: 2
      Fault Frequency: 153
      Reset counter: 69
      Mileage: 746 km
      Time Indication: 0
      Date: 2002.14.05
      Time: 16:52:23

      Freeze Frame:
      Term 15 On
      Voltage: 13.65 V
      ON
      ON
      Term 50 Off
      OFF
      OFF

      00987 - Lamp for Brake Light; Left (M9)
      010 - Open or Short to Plus
      Freeze Frame:
      Fault Status: 01101010
      Fault Priority: 1
      Fault Frequency: 154
      Reset counter: 69
      Mileage: 746 km
      Time Indication: 0
      Date: 2002.14.05
      Time: 16:57:55

      Freeze Frame:
      Term 15 Off
      Voltage: 12.40 V
      OFF
      ON
      Term 50 Off
      OFF
      OFF

      00988 - Lamp for Brake Light; Right (M10)
      010 - Open or Short to Plus
      Freeze Frame:
      Fault Status: 01101010
      Fault Priority: 1
      Fault Frequency: 155
      Reset counter: 69
      Mileage: 746 km
      Time Indication: 0
      Date: 2002.14.05
      Time: 17:04:23

      Freeze Frame:
      Term 15 Off
      Voltage: 12.45 V
      OFF
      ON
      Term 50 Off
      OFF
      OFF

      01800 - Light Switch (E1)
      008 - Implausible Signal - Intermittent
      Freeze Frame:
      Fault Status: 00101000
      Fault Priority: 3
      Fault Frequency: 11
      Reset counter: 83
      Mileage: 1222 km
      Time Indication: 0
      Date: 2002.14.10
      Time: 17:20:13

      Freeze Frame:
      Term 15 Off
      Voltage: 12.50 V
      OFF
      ON
      Term 50 Off
      OFF
      OFF

      01516 - Terminal 30; Left
      011 - Open Circuit - Intermittent
      Freeze Frame:
      Fault Status: 00101011
      Fault Priority: 1
      Fault Frequency: 4
      Reset counter: 83
      Mileage: 1222 km
      Time Indication: 0
      Date: 2002.14.10
      Time: 17:43:20

      Freeze Frame:
      Term 15 Off
      Voltage: 12.65 V
      OFF
      OFF
      Term 50 Off
      OFF
      OFF

      02391 - Terminal 30 Reference
      011 - Open Circuit - Intermittent
      Freeze Frame:
      Fault Status: 00101011
      Fault Priority: 4
      Fault Frequency: 4
      Reset counter: 83
      Mileage: 1222 km
      Time Indication: 0
      Date: 2002.14.10
      Time: 17:43:21

      Freeze Frame:
      Term 15 Off
      Voltage: 12.70 V
      OFF
      OFF
      Term 50 Off
      OFF
      OFF

      01565 - Luggage Compartment Light (W3)
      012 - Electrical Fault in Circuit - Intermittent
      Freeze Frame:
      Fault Status: 00101100
      Fault Priority: 4
      Fault Frequency: 1
      Reset counter: 74
      Mileage: 1222 km
      Time Indication: 0
      Date: 2002.14.10
      Time: 22:19:35

      Freeze Frame:
      Term 15 Off
      Voltage: 12.40 V
      OFF
      ON
      Term 50 Off
      OFF
      OFF

      00927 - Terminal 30 (Right)
      011 - Open Circuit - Intermittent
      Freeze Frame:
      Fault Status: 00101011
      Fault Priority: 1
      Fault Frequency: 2
      Reset counter: 79
      Mileage: 1309 km
      Time Indication: 0
      Date: 2002.14.11
      Time: 23:58:44

      Freeze Frame:
      Term 15 Off
      Voltage: 12.70 V
      OFF
      ON
      Term 50 Off
      OFF
      OFF

      02195 - Dimmer Switch Instrument Panel & Switch Lighting (E20)
      002 - Lower Limit Exceeded - Intermittent
      Freeze Frame:
      Fault Status: 00100010
      Fault Priority: 5
      Fault Frequency: 2
      Reset counter: 79
      Mileage: 1309 km
      Time Indication: 0
      Date: 2002.14.11
      Time: 23:58:43

      Freeze Frame:
      Term 15 Off
      Voltage: 12.70 V
      OFF
      ON
      Term 50 Off
      OFF
      OFF

      01336 - Data Bus for Comfort System
      004 - No Signal/Communication - Intermittent
      Freeze Frame:
      Fault Status: 00100100
      Fault Priority: 6
      Fault Frequency: 7
      Reset counter: 79
      Time Indication: 0

      Freeze Frame:
      Term 15 Off
      Voltage: 12.70 V
      OFF
      ON
      Term 50 Off
      OFF
      OFF


      -------------------------------------------------------------------------------
      Address 15: Airbags (J234) Labels: 5K0-959-655.clb
      Part No SW: 5K0 959 655 H HW: 5K0 959 655 H
      Component: AirbagVW10G 013 0724
      Serial number: 003GVRA0ERUT
      Coding: 00003131
      Shop #: WSC 01357 011 00200
      ASAM Dataset: EV_AirbaVW10SMEVW360 A01014
      ROD: EV_AirbaVW10SMEVW360_VW36.rod
      VCID: 3FA398C5A666A36

      Seat occupied recognition:
      Subsystem 1 - Part No SW: 5K0 959 339 HW: 5K0 959 339
      Component: BF-Gewichtss. 007 0002
      Serial number: ---0000R--000R0LJ900

      Crash sensor for side airbag; driver side:
      Subsystem 2 - Part No SW: 5K0 959 354 HW: 5K0 959 354
      Component: S.Sens.Fahr.V H01 ----
      Serial number: 3572MSME54050142ZZZE

      Crash sensor for side airbag; passenger side:
      Subsystem 3 - Part No SW: 5K0 959 354 HW: 5K0 959 354
      Component: S.Sens.Beif.V H01 ----
      Serial number: 3582MSME7B7A1542ZZZ+

      Crash sensor for side airbag; rear driver side:
      Component: S.Sens.Fahr.H --- ----
      Serial number: 3512QSME48030A58ZZZT

      Crash sensor for side airbag; rear passenger side:
      Component: S.Sens.Beif.H --- ----
      Serial number: 3522QSME083E7D4BZZZ9

      Crash sensor for front airbag; driver side:
      Component: F.Sens.Fahr --- ----
      Serial number: 35527SME3C0E0328ZZZI

      Crash sensor for front airbag; passenger side:
      Component: F.Sens.Beif --- ----
      Serial number: 35627SME33430C28ZZZC

      No fault code found.

      -------------------------------------------------------------------------------
      Address 16: Steering wheel (J527) Labels: 5K0-953-569.clb
      Part No SW: 5K0 953 521 BR HW: 5K0 953 569 E
      Component: LENKS.MODUL 014 0140
      Revision: FF010040 Serial number: 20110801301698
      Coding: 101A140000
      Shop #: WSC 01357 011 00200
      ASAM Dataset: EV_SMLSNGVOLWSXS A01004
      ROD: EV_SMLSNGVOLWSXS_VW36.rod
      VCID: 7DDF22CDECEA716

      Multifunction steering wheel control module:
      Subsystem 1 - Part No SW: 5K0 959 542 HW: 5K0 959 542 Labels: 3C8-959-537.CLB
      Component: E221__MFL-TAS H08 0010
      Coding: 830000

      No fault code found.

      -------------------------------------------------------------------------------
      Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
      Part No SW: 5K6 920 972 C HW: 5K6 920 972 C
      Component: KOMBI H03 0607
      Serial number: 00000000000000
      Coding: 270D01
      Shop #: WSC 01357 011 00200
      ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04114
      ROD: EV_Kombi_UDS_VDD_RM09_VW36.rod
      VCID: 364DFDE1895C62E

      2 Faults Found:
      12664832 - Function Restricted due to Missing Message(s)
      U1111 00 [008] - -
      Intermittent - Confirmed - Tested Since Memory Clear
      Freeze Frame:
      Fault Status: 00000001
      Fault Priority: 6
      Fault Frequency: 1
      Reset counter: 79
      Mileage: 1406 km
      Date: 2002.14.12
      Time: 20:51:55

      13631488 - Function Restricted due to Missing Message(s)
      U1111 00 [008] - -
      Intermittent - Confirmed - Tested Since Memory Clear
      Freeze Frame:
      Fault Status: 00000001
      Fault Priority: 6
      Fault Frequency: 1
      Reset counter: 79
      Mileage: 1406 km
      Date: 2002.14.12
      Time: 20:51:57


      -------------------------------------------------------------------------------
      Address 19: CAN Gateway (J533) Labels: 7N0-907-530-V2.clb
      Part No SW: 7N0 907 530 H HW: 1K0 907 951
      Component: J533 Gateway H42 1620
      Revision: H42 Serial number: 240711F1000713
      Coding: 350002
      Shop #: WSC 01357 011 00200
      VCID: 354FFAED9C5A696

      2 Faults Found:
      00457 - Control Module for Network (J519)
      004 - No Signal/Communication - Intermittent
      Freeze Frame:
      Fault Status: 00110100
      Fault Priority: 2
      Fault Frequency: 1
      Reset counter: 79
      Mileage: 1406 km
      Time Indication: 0
      Date: 2002.14.12
      Time: 20:51:55

      01330 - Central Control Module for Central Convenience (J393)
      004 - No Signal/Communication - Intermittent
      Freeze Frame:
      Fault Status: 00110100
      Fault Priority: 2
      Fault Frequency: 1
      Reset counter: 79
      Mileage: 1406 km
      Time Indication: 0
      Date: 2002.14.12
      Time: 20:51:55


      -------------------------------------------------------------------------------
      Address 25: Immobilizer (J334) Labels: 5K0-920-xxx-25.clb
      Part No SW: 5K0 953 234 HW: 5K0 953 234
      Component: IMMO H03 0607
      Serial number: 00000000000000
      Coding: 000007
      Shop #: WSC 01357 011 00200
      ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03009
      ROD: EV_Immo_UDS_VDD_RM09_VW36.rod
      VCID: EAF599910D6476E

      No fault code found.

      -------------------------------------------------------------------------------
      Address 2B: Steer. Col. Lock (J764) Labels: 5K0-905-861.clb
      Part No SW: 5K0 905 861 A HW: 5K0 905 861 A
      Component: ELV-PQ35 H20 0230
      Revision: 00000000 Serial number: 11000153013005
      Coding: 4900000000000000
      Shop #: WSC 01357 011 00200
      ASAM Dataset: EV_ELVMarquMPVW36X A01001
      ROD: EV_ELVMarquMPVW36X.rod
      VCID: 2E7DD581710C5AE

      2 Faults Found:
      12664832 - Function Restricted due to Missing Message(s)
      U1111 00 [008] - -
      Intermittent - Confirmed - Tested Since Memory Clear
      Freeze Frame:
      Fault Status: 00000001
      Fault Priority: 6
      Fault Frequency: 1
      Reset counter: 79
      Mileage: 1406 km
      Date: 2002.14.12
      Time: 20:51:55

      12665089 - Function Restricted due to Missing Message(s)
      U1111 00 [008] - -
      Intermittent - Confirmed - Tested Since Memory Clear
      Freeze Frame:
      Fault Status: 00000001
      Fault Priority: 6
      Fault Frequency: 1
      Reset counter: 79
      Mileage: 1406 km
      Date: 2002.14.12
      Time: 20:51:56

      End ---------------------------------------------------------------------

    2. Remove Advertisements

      Advertisements
       

    3. Member iamgap's Avatar
      Join Date
      Jan 17th, 2010
      Location
      Hubert, NC
      Posts
      501
      Vehicles
      2010 Golf
      12-20-2011 08:46 PM #1052
      Quote Originally Posted by pbafire View Post
      KanDyWyTE.... that scan below... is that pre mod or post mod scan? I've done a few mods on my 2012 Tig SEL and had a question on one. Perhaps you, Dana, or any of the experts here can help??

      https://forums.vwvortex.com/showthrea...1#post75011290

      Saw your list and found a few I need to go back to do such as heater mem.

      But, what is the emergency brake lights/flasher tweak??.... gotta a link on reading material for that.... I missed it other readings.
      I am not sure how similar yours is to the 2.5L Golf, but you can find all the screenshots from my VCDS here.
      https://forums.vwvortex.com/showthrea...1#post67919758

      For the Emergency blink, you make the changes in Byte 16 of 09- Central Electonincs



      Bit 1 will make your Brake Lights blink when ABS is activated.
      Bit 2 will make your Turn Signals blink when ABS is activated.

      I have read that they will continue to blink until you start tolling again.


      gap

    4. Member
      Join Date
      Nov 30th, 2011
      Posts
      481
      Vehicles
      2012 Passat V6 SEL Prem/Nav; 2012 Tiguan SEL Prem/Nav
      12-20-2011 09:33 PM #1053
      Thanks for the description.... wasn't sure what that feature did.

      Quote Originally Posted by iamgap View Post
      I am not sure how similar yours is to the 2.5L Golf, but you can find all the screenshots from my VCDS here.
      https://forums.vwvortex.com/showthrea...1#post67919758

      For the Emergency blink, you make the changes in Byte 16 of 09- Central Electonincs



      Bit 1 will make your Brake Lights blink when ABS is activated.
      Bit 2 will make your Turn Signals blink when ABS is activated.

      I have read that they will continue to blink until you start tolling again.


      gap

    5. 12-26-2011 03:31 PM #1054
      Dana,

      Can u tell me if i have a Highline CECM? Spent half hour with VW parts guy he couldnt tell me even after i gave my VIN. Its driving me nuts!


      Address 09: Cent. Elect. (J519) Labels: 1K0-937-08x-09.clb
      Part No SW: 1K0 937 087 G HW: 1K0 937 087 G
      Component: BCM PQ35 H+ 103 0574
      Revision: 00103 AF
      Coding: 6D180A1A90272AC480080081600005C441010086434D8D6064 8020200000
      Shop #: WSC 01357 011 00200
      VCID: 354FF74425D1

      Part No: 1K1 955 119 F
      Component: Wischer 19041 21 0512
      Coding: 009795

      No fault code found.


      THANK YOU !!!!!!!!

      -P
      2017 RS3-
      2014 B8.5 S5- Unitronic 2+
      2010 MK6 GTI- Unitronic KO4
      [email protected]

    6. Member
      Join Date
      Feb 11th, 2004
      Location
      Magdeburg, Germany
      Posts
      9,811
      Vehicles
      '67 Ford Mustang Conv.
      12-26-2011 04:21 PM #1055
      As the control module identification states, it's "H+" meaning "High+".

    7. 12-26-2011 05:01 PM #1056
      Quote Originally Posted by Theresias View Post
      As the control module identification states, it's "H+" meaning "High+".
      so its not the part number that matters? Doesnt BCM stand for Body Control Module? I thought those numbers were the BCM update version? I could be wrong...

      Is the BCM different than the CECM or part of it??

      this is a 2010 gti that came halogen equipped.
      2017 RS3-
      2014 B8.5 S5- Unitronic 2+
      2010 MK6 GTI- Unitronic KO4
      [email protected]

    8. Member
      Join Date
      Feb 11th, 2004
      Location
      Magdeburg, Germany
      Posts
      9,811
      Vehicles
      '67 Ford Mustang Conv.
      12-26-2011 05:08 PM #1057
      A Central Electronics Control Module (CECM) does not have all the same functionality as a Body Control Module (BCM). While the CECM covers lighting and similar electrical functions, the BCM in addition covers what used to be a seperate Comfort Control Module (CCM). Meaning where older models had a CECM and a CCM, the newer ones only have a BCM.

      The idetification contains more than just the software version of the control module. In this case "BCM PQ35 H+ 103 0574" tells you that it's a BCM used in the PQ35 vehicle platform. This specific one is a High+ and it's hardware version/revision is 103 while the software version is 0574. With the older CECMs you could only determine the "type" based on the part number, with the BCMs now you can do it based on the part number as well as the identification.

    9. 12-26-2011 05:13 PM #1058
      Quote Originally Posted by Theresias View Post
      A Central Electronics Control Module (CECM) does not have all the same functionality as a Body Control Module (BCM). While the CECM covers lighting and similar electrical functions, the BCM in addition covers what used to be a seperate Comfort Control Module (CCM). Meaning where older models had a CECM and a CCM, the newer ones only have a BCM.

      The idetification contains more than just the software version of the control module. In this case "BCM PQ35 H+ 103 0574" tells you that it's a BCM used in the PQ35 vehicle platform. This specific one is a High+ and it's hardware version/revision is 103 while the software version is 0574. With the older CECMs you could only determine the "type" based on the part number, with the BCMs now you can do it based on the part number as well as the identification.
      excellent info. so then H+ or High+ is the same as/means Highline.

      Does the CECM handle any electric engine functions like fuel pressure sensors? The reason i ask is im trying to find the source of a recurring fuel rail pressure too high error code and want to eliminate the CECM . Could a faulty CECM mess with engine monitoring functions like that?

      Thank u for responding.
      2017 RS3-
      2014 B8.5 S5- Unitronic 2+
      2010 MK6 GTI- Unitronic KO4
      [email protected]

    10. Member
      Join Date
      Feb 11th, 2004
      Location
      Magdeburg, Germany
      Posts
      9,811
      Vehicles
      '67 Ford Mustang Conv.
      12-26-2011 05:24 PM #1059
      "High" stands for "Highend" not "Highline", thats a common error but doesn't make a difference in the end. It's the module with most functionality. Regarding your fuel pressure issues, check our WIKI for your DTC or open up an own topic with an Auto-Scan from the car.

    11. 12-26-2011 05:41 PM #1060
      Quote Originally Posted by Theresias View Post
      "High" stands for "Highend" not "Highline", thats a common error but doesn't make a difference in the end. It's the module with most functionality. Regarding your fuel pressure issues, check our WIKI for your DTC or open up an own topic with an Auto-Scan from the car.
      I need to do that for the fuel error.

      ok, So i have the CECM needed to install the oem xenons, without auto leveling? oem+ sells the complete set plug and play for halogen equipped, it just says highline cecm needed.

      I appreciate all this info, ive been seaching for weeks, calling vw , etc, no one could give me straight answers, especially vw parts dept.
      2017 RS3-
      2014 B8.5 S5- Unitronic 2+
      2010 MK6 GTI- Unitronic KO4
      [email protected]

    12. Member
      Join Date
      Feb 11th, 2004
      Location
      Magdeburg, Germany
      Posts
      9,811
      Vehicles
      '67 Ford Mustang Conv.
      12-26-2011 05:44 PM #1061
      Please see our WIKI for Xenon retrofit questions...

      http://wiki.ross-tech.com/wiki/index...t_Retrofitting

      ...unless you also retrofit the automatic leveling we will not provide you with any type of support.

    13. 12-26-2011 05:48 PM #1062
      Quote Originally Posted by Theresias View Post
      Please see our WIKI for Xenon retrofit questions...

      http://wiki.ross-tech.com/wiki/index...t_Retrofitting

      ...unless you also retrofit the automatic leveling we will not provide you with any type of support.
      im just assuming they dont come with the Kuftec shock mounted leveling harware from oem+ , i still plan to do that. Im just confirming the cecm is the right one for oem xenons as step one.
      2017 RS3-
      2014 B8.5 S5- Unitronic 2+
      2010 MK6 GTI- Unitronic KO4
      [email protected]

    14. Forum Sponsor Dana @ Ross-Tech's Avatar
      Join Date
      Sep 15th, 2009
      Location
      Apollo, PA
      Posts
      2,907
      Vehicles
      02 Gti, 12 Tiggy SEL
      12-27-2011 02:52 PM #1063
      1K0-937-087-G-??? will support Xenon lamps, but as Sebastian mentioned all of the components must be installed for support from us.
      Dana Marie

      P.S. No Scan = No Soup

    15. 12-27-2011 02:59 PM #1064
      Quote Originally Posted by Dana @ Ross-Tech View Post
      1K0-937-087-G-??? will support Xenon lamps, but as Sebastian mentioned all of the components must be installed for support from us.
      Thanks Dana

      i have those last 3's at home, do u need them? I know ur policy, its a smart one regarding HID's but i needed to know if i had the right cecm first b4 dumping $ into parts. So the one i have will work the shutter too? Its amazing how hard it was to confirm i have a highline, even from vw.
      2017 RS3-
      2014 B8.5 S5- Unitronic 2+
      2010 MK6 GTI- Unitronic KO4
      [email protected]

    16. 12-27-2011 03:00 PM #1065
      Quote Originally Posted by allset View Post
      Thanks Dana

      i have those last 3's at home, do u need them? I know ur policy, its a smart one regarding HID's but i needed to know if i had the right cecm first b4 dumping $ into parts. So the one i have will work the shutter too? Its amazing how hard it was to confirm i have a highline, even from vw.
      actually here it is:

      1K0 937 087 G Z1E
      2017 RS3-
      2014 B8.5 S5- Unitronic 2+
      2010 MK6 GTI- Unitronic KO4
      [email protected]

    17. 12-27-2011 06:22 PM #1066
      Quote Originally Posted by allset View Post
      Thanks Dana

      i have those last 3's at home, do u need them? I know ur policy, its a smart one regarding HID's but i needed to know if i had the right cecm first b4 dumping $ into parts. So the one i have will work the shutter too? Its amazing how hard it was to confirm i have a highline, even from vw.
      Quote Originally Posted by allset View Post
      actually here it is:

      1K0 937 087 G Z1E
      Dana,

      I dont want to be a PITA but the above is correct, right? I dont know if those last 3 digits matter. I just dont want to pay 1400 for these oem heads plus all the other hardware and find i have the wrong cecm. I did see in the Central Electric mod that the bit for "xenon installed with shutter" is blue and checkable. I would assume the text wouldnt be blue if it wasnt an active option, would it?

      thanks again for the help.

      -PG
      2017 RS3-
      2014 B8.5 S5- Unitronic 2+
      2010 MK6 GTI- Unitronic KO4
      [email protected]

    18. Junior Member
      Join Date
      Dec 17th, 2011
      Location
      ATL
      Posts
      67
      Vehicles
      2012 Jetta TDI Premium w/ Nav & Appearance
      12-27-2011 09:32 PM #1067
      So... I have a 2012 US version of the Jetta TDI Premium with NAV and would like to know where to go in VCDS to do the following

      1) Turn OFF door chime

      2) Turn OFF seat belt warning

      3) Turn ON Remote (convenience windows) with Sunroof OPEN and NOT TILT as well as close them from key fob

      4) Turn ON coming Home feature

      5) Convenience lane change to 4 blinks

      6) Curb assist with the mirrors when in reverse

      7) Leave radio ON (with ignition off) until the door is OPENED (like it does when on a call)

      8) Teardrop wiper wipe

      9) Instrument staging when first press of the KESSY ignition button

      10) Turn OFF DRL

      11) Anything else that is cool for the MK6 US Jetta Sedan (suggestions and instructions please)

      12) Thanks in advance... I've searched 3 forums and all is confusing... I'm obviously New

    19. Member iamgap's Avatar
      Join Date
      Jan 17th, 2010
      Location
      Hubert, NC
      Posts
      501
      Vehicles
      2010 Golf
      12-28-2011 08:55 PM #1068
      Quote Originally Posted by 1Afly View Post
      So... I have a 2012 US version of the Jetta TDI Premium with NAV and would like to know where to go in VCDS to do the following

      1) Turn OFF door chime

      2) Turn OFF seat belt warning

      3) Turn ON Remote (convenience windows) with Sunroof OPEN and NOT TILT as well as close them from key fob

      4) Turn ON coming Home feature

      5) Convenience lane change to 4 blinks

      6) Curb assist with the mirrors when in reverse

      7) Leave radio ON (with ignition off) until the door is OPENED (like it does when on a call)

      8) Teardrop wiper wipe

      9) Instrument staging when first press of the KESSY ignition button

      10) Turn OFF DRL

      11) Anything else that is cool for the MK6 US Jetta Sedan (suggestions and instructions please)

      12) Thanks in advance... I've searched 3 forums and all is confusing... I'm obviously New
      I believe 1 and 2 are done from Instrament - 17. You have to set it to GB

      3) Central Electronics - 09, Long Coding Helper, Byte 3, bit 2 unchecked and bit 5 checked. Sun Roof will only close if it is open. It will not open with the fob


      4) Central Electronics - 09, Long Coding Helper, Byte 17 bit 5 checked


      5) Is in the Adaptation section of the Central Electronics. Then you need to remove the key, put the key back in, enter the setup of the MFI/MFD/MFA, and set the Lights section to Factory Defaults. If it is not working at all, you can turn it on at Central Electronics - 09, Long Coding Helper, Byte 16 bit 0

      6) Not available in the North American, but Central Electronics - 09, Long Coding Helper, Byte 4 bit 3 (also requires components, and is expensive)


      7) As I understand it, this is only an option with the standard radio and a non-KESSY car. I have both. There is no setting I have found in VCDS for this, but it would probably be under Radio, and maybe in Adaptation

      8) Central Electronics - 09, Long Coding Helper, Byte 21 bit 4. You can also turn of the automaic wipe while in reverse by unchecking bit 6


      9) Adaptation in the Instrament - 17, but it only works on a few clusters. It will let you know if the change is accepted when you attempt it

      10a) For Halogens Central Electronics - 09, Long Coding Helper, Byte 15 bit 6 unchecked


      10b) For HIDS Central Electronics - 09, Long Coding Helper, Byte 11 bit 2 unchecked


      11) Allow windows to continue to close after opening a door (I have not been able to get this to work on my buddies '12 GTI, but you can try.) Central Electronics - 09, Long Coding Helper, Byte 4 bit 4 unchecked.


      Brake Lights and/or Turn Signal flashing when ABS is activated. Central Electronics - 09, Long Coding Helper, Byte 16 bit 1 and/or 2



      12) I hope this is less confusing for a noobee


      gap

    20. Junior Member klitoni's Avatar
      Join Date
      Mar 31st, 2010
      Location
      Albania
      Posts
      48
      Vehicles
      2002/Vv/Passat
      12-31-2011 11:21 AM #1069
      Quote Originally Posted by iamgap View Post
      I believe 1 and 2 are done from Instrament - 17. You have to set it to GB

      3) Central Electronics - 09, Long Coding Helper, Byte 3, bit 2 unchecked and bit 5 checked. Sun Roof will only close if it is open. It will not open with the fob



      gap
      Im a bit confuse.I want to open the windows from remote(not sunrof)and i want to close windows from remote(with sunrof)
      IT can be done only by checking bit 5 and uncheck bit 2?
      THnx
      VW Passat 2001 Trendine TDI 130 HP AVF Engine FRK Gearbox 6 Speed

    21. Member
      Join Date
      Nov 30th, 2011
      Posts
      481
      Vehicles
      2012 Passat V6 SEL Prem/Nav; 2012 Tiguan SEL Prem/Nav
      12-31-2011 08:28 PM #1070
      bit 2 defines tilt or open, either way it is being vented... just one vents up (lift), one vents via sliding it back (open)

    22. Junior Member klitoni's Avatar
      Join Date
      Mar 31st, 2010
      Location
      Albania
      Posts
      48
      Vehicles
      2002/Vv/Passat
      01-01-2012 12:58 PM #1071
      Quote Originally Posted by pbafire View Post
      bit 2 defines tilt or open, either way it is being vented... just one vents up (lift), one vents via sliding it back (open)
      if i check only bit 5 i have comfrot closing and opening windows?
      VW Passat 2001 Trendine TDI 130 HP AVF Engine FRK Gearbox 6 Speed

    23. 01-01-2012 01:10 PM #1072
      I purchased a german hiline cecm a few weeks ago to start some retrofits I was going to be doing. I noticed that the coding cope dover perfectly, however, the adaption channels no longer match. Most of the channels just read error now (when using the drop down for specific items such as changing the comfort blink # or turning on windows down via the fob). What info do you need from me to look into this further? Full scan is coming, but I am unsure of how helpful that alone will be.

      Thanks, Justin.

    24. Member
      Join Date
      Nov 30th, 2011
      Posts
      481
      Vehicles
      2012 Passat V6 SEL Prem/Nav; 2012 Tiguan SEL Prem/Nav
      01-01-2012 06:18 PM #1073
      Quote Originally Posted by klitoni View Post
      if i check only bit 5 i have comfrot closing and opening windows?
      Try it and see... but no I bet. Clear is a 0 (open, slide back), check is a 1 (open / lift / i.e. up). Bit 2 checked or unchecked still controls behavior of the sunroof.

    25. Member iamgap's Avatar
      Join Date
      Jan 17th, 2010
      Location
      Hubert, NC
      Posts
      501
      Vehicles
      2010 Golf
      01-01-2012 08:14 PM #1074
      Quote Originally Posted by klitoni View Post
      if i check only bit 5 i have comfrot closing and opening windows?
      Quote Originally Posted by pbafire View Post
      Try it and see... but no I bet. Clear is a 0 (open, slide back), check is a 1 (open / lift / i.e. up). Bit 2 checked or unchecked still controls behavior of the sunroof.
      Yes. The MKVI is much easier than the MKV. You had to make 3 or 4 different changes on the MKV, but the MKVI is just this one. If you don't believe me, look at http://www.iamgap.com/VAG-COM/VCDS-09-00.jpg through http://www.iamgap.com/VAG-COM/VCDS-09-29.jpg. Those are screen shots of my 2.5L Golf MKVI before I made changes (or after one or two).


      gap

    26. Junior Member
      Join Date
      Mar 3rd, 2009
      Location
      Quebec city
      Posts
      89
      Vehicles
      Volkswagen Golf R 2012, Audi S4 2011, Ford shelby GT500 Convertible 2011
      01-08-2012 11:10 AM #1075
      Hello all ! Unfortunately, I haven't read all those wonderful post on all those pages, but I hope someone can help me out here.

      Here's what I currently have:

      -Golf TDI 2010
      -Highline CECM recently swapped with firmware over 0575
      -euro switch with trigger wire installed
      -Euro Golf R tail light with LED AND rear fog
      -front HID+LED headlamps from 2012 GTI, connected using Kufatec harness

      I'd like to have the front LED to be DRL, and I'd like to have all my others lights functionnals as well, using their own position on the euro switch.

      Anyone can help me please ? I'm tired of all those bulb out error !

      Right now headlamp, taillamp, rear fog are all functionnals, but I'm having bulb out error for the front high/low beams. Also none of the front LED light up....

    Page 43 of 54 FirstFirst ... 3339404142434445464753 ... LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •