yeah, seem a whole bunch of projects get shelved after marriage occurs!
Sorry guys, I have the same status, now is so darn cold that I cannot work on the car yet
But, here is a link for a new controller 1T0919475P
Does somebody knows what improve does this one has VS H version
I have connected the Park Assist Button, BUT it seems the pins for the button on the diagram are incorrect or need the hole stuff connected (module, sensors etc) to be iluminated.
I have to connect Pin 3 for Ilumination and Pin 6 to Ground (as the other buttons) which in the diagram indicates is Pin 4 and 2 for Ground.
MAYBE it needs to be connected all together to be iluminated the way is intended.
Can you confirm?
I had a little time and just connected the button for the looks at the moment.
I think you can use pin 3 from any of the other buttons to get power for the button light.
Does anyone know the pinout on the CECM for the button power? I have found pin 51 on connector B, but I am unsure if this is correct and would like someone with some inside info to confirm.
I see Kufatec now offeres the retrofit for park assist, but only as if installed by them...
Wonder what the big issue is?
There's also http://www.carsystems.pl/vw-golf-mk6...ade,id375.html, but that assumes you already have OPS.
2012 Candy White GTI w/Autobahn and DSG
from this link
Yea, the new wires fit into the original cable.
I did get the kit, but I am not sure I trust the seller. The seller sent the same PDC sensors to use for PLA and claims it works the same way. I haven't had a chance to try it out.
The seller even sells PDC and PLA sensors for two different price points on their own site, yet got very defensive when I asked how come. I guess I'll have to try it out.
To be as OEM is possible, I bought 2 x PLA Sensor 1T0919297A
I also bought 2 x holder sensor 3C0 919 493 / 494 and 2x 1T0 919 133 B ring seal
The holders are from Passat. The other holders that wil fitt 1T0919297A PLA sensors are:
1x 1T0 919 399/400 from Touran
1x 3C8 919 399 GRU - (CC-2013)
1x 3C8 919 400 GRU - (CC-2013)
1x 3C8 919 493 B GRU - (CC-2012)
1x 3C8 919 494 B GRU - (CC-2012)
1x 5M0 919 399 A GRU - (GPlus-2013)
1x 5M0 919 400 A GRU - (GPlus-2013)
The PDC sensors that will came with PLA kitt from carsystems.pl I will use for PLA 2.0 retrofit (for perpendicular parking spaces) if my ABS/ESP allows (I have from factory OPS)