VWVortex.com - :: GruvenParts.com Custom Billet Accessories for VW/Audi !
Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 4 of 4 FirstFirst 1234
    Results 76 to 92 of 92

    Thread: :: GruvenParts.com Custom Billet Accessories for VW/Audi !

    1. 03-19-2018 11:32 PM #76
      "GruvenParts.com builds bulletproof TIG welded Y Pipes to replace the OEM plastic in your VW coolant system!


      Billet Upper Radiator Hose Y Pipes

      PLEASE NOTE : This part is professionally TIG welded! There are no junk tapped threads into thin wall aluminum like the lesser versions offered by unscrupulous rip off artists. And its warranted for life!

      An absolute MUST HAVE for all MK3 VR6 owners and MK4 New Beetle owners. The upper radiator hose on these models is quite a pricey item from the dealer – usually about $100. The most documented cause of replacement on this hose is due to the plastic Y fitting which connects the 3 short hose pieces. The VW Y pipe cannot be bought separately, and is not suited for the high temperatures under the hood. Hell, its plastic – what did you expect?!

      Dont buy the OEM plastic part when you can buy this BILLET ALUMINUM TIG Welded replacement part for half the price!

      If you need a custom water temp sensor port welded on, please let us know. We are happy to perform customization on ANY of our products.

      Replaces the following OEM P/N :

      1H0-122-101E (1H0122101E) – MK3 Golf/Jetta VR6
      3A0-122-101E (3A0122101E) – VR6 Passat
      1C0-121-438A (1C0121438A) – New Beetle
      "

    2. Remove Advertisements
      VWVortex.com
      Advertisements
    3. 03-26-2018 11:02 PM #77
      "


      Click Here for Peloquin Limited Slip Diffs Sold By GruvenParts


      *** GRUVEN BEATS ALL COMPETITOR PRICING - Email [email protected] for Current Pricing Info ***
      We almost always have group buys and specials going on, to get in on the best pricing for these diffs, just email us!


      We've all used his legendary limited slip differentials for years.

      GruvenParts.com is proud to team up with Gary Peloquin to become the newest distributor of these great front and rear limited slip diffs for a wide range of vehicles. If you dont already have 1 installed, trust us, YOU NEED 1! These limited slip diffs improve acceleration, braking, and cornering. Win-Win-Win.

      GruvenParts.com has the best pricing and customer service, please contact us for more info on these great limited slip diffs!

      We offer the following Peloquin LSD's and some others. Please provide your transmission code and shipping address when inquiring via email.

      02M :
      02M-498-005B (02M498005B) MK4 R32 / Audi TT MK1 Front Diff P/N
      MK4R32 / Audi TT MK1 Rear Diff
      02M-498-005A (02M498005A)

      020
      020-498-005A (020498005A)
      020 – 80% kit - This kit increases the factory 20% anti torque steer effect to 80%.

      02J
      02J-498-005A (02J498005A)
      02J-498-005B (02J498005B)

      02A
      02A-498-005A (02A498005A)

      02K
      02K-498-005A (02K498005A)

      02C
      02C-498-005A (02C498005A)
      02C-498-005B (02C498005B)
      02C-498-005 Rear (02C498005)

      02Q
      02Q-498-006A (02Q498006A)
      02Q-498-005B (02Q498005B)

      02E DSG 2WD and 4WD"

    4. 04-09-2018 09:54 PM #78
      "
      3.2L MK5 VR6 Billet Lightweight Pulley Kits

      MK5 3.2L VR6 Lightweight Pulley Kit

      You guys asked for Billet Aluminum super strong, super lightweight MK5 3.2L VR6 Pulleys and GruvenParts.com listened!

      We are pleased to offer our super sleek billet lightweight crank, water pump, and alternator pulleys for your 3.2L MK5 VR6 engine. These pulleys are precision CNC'd from aircraft grade 6061-T651 billet aluminum. Complete pulley set reduces the engine rotating mass by over 8.5 lbs !!

      Lightweight Billet Aluminum MK5 3.2L VR6 Crank Pulley -- Normal Drive, Not Underdrive.

      It’s time to lose the boat anchor of the steel Audi and VW VR6 crank pulley. This 500 gram lightweight version is the lightest crank pulley out there and IS NOT UNDER-DRIVEN so it wont cause problems with overheating or low alternator voltage! DO NOT RUN AN UNDER-DRIVEN CRANK PULLEY ON YOUR MK5 R32!!! Your engine needs all the water pump speed it can get to properly cool, and also needs proper alternator voltage to spin the electric fans at the correct speed. Using an under-driven crank pulley will cause your VR6 to run hot and is NOT RECOMMENDED. This NORMAL DRIVE lightweight crank pulley will allow the engine to spool up faster while preventing inertial losses caused by the overweight OEM pulley. Comes with a specially machined replacement key for a perfect fit. Fits all of the MK5 3.2L VR6 engines. Please note that this pulley IS 6 rib and specifically machined for the MK5 R32. Replaces OEM P/N 022-105-243J (022105243J)

      Lightweight Billet Aluminum MK5 3.2L VR6 Water Pump Pulley

      The OEM steel water pump pulley is stamped which creates internal stresses that eventually cause the pulley to crack at the sharp bend radius. Needless to say, you don’t need this problem on a hot running VR. Ours is machined from a solid block of aluminum with generous corner radii and is therefore many times stronger than the OEM. Weighing in at a scant 250 grams, its less than half the weight of the stamped OEM steel pulley. Fits all of the MK5 3.2L VR6 engines. Replaces OEM P/N 021-121-031D (021121031D).

      Lightweight Billet Aluminum Alternator Pulley

      A 100 gram paper-light billet aluminum version of the steel OEM alternator pulley that lets the motor spin more freely. Complete your pulley set for a show quality engine bay. Fits all MK5 3.2L VR6 engines.
      "

    5. 04-16-2018 11:21 PM #79
      "
      Billet 12V VR6 Drive Belt Pulleys - All 12V VR6

      GruvenParts.com offers a complete set of ultra sleek lightweight 12V VR6 power pulleys. These include lightweight billet crank, power steering, water pump, tensioner, and alternator pulleys for your 12V VR6 engine. These pulleys are precision CNC'd from aircraft grade billet aluminum and reduce the rotating mass by a whopping 8.5 lbs! All pulleys ARE NORMAL DRIVE (NOT UNDER-DRIVE). These pulleys will not change the speed of the supercharger and will not void any supercharger warranties. Comes with new crank bolt !

      Buy them as a set and save!

      These pulleys replace the following OEM part numbers :

      Crank Pulley : 021-105-243 (021105243)
      Tensioner Pulley: 021-145-299 (021145299)
      Water Pump Pulley: 021-121-031A (021121031A)
      Alternator Pulley: 021-903-119 (021903119)
      Power Steering Pulley : 021-145-255 (021145255)
      "

    6. 04-24-2018 11:04 PM #80
      "

      Cast Aluminum MKIV and MKV 12V and 24V VR6 Thermo Housing Assemblies ARE FINALLY HERE !!

      GruvenParts.com is happy to distribute these beautiful cast aluminum thermostat housing assemblies for the Audi MK1 and VW MKIV and MKV 12V and 24V VR6 engines. This part carries a LIFETIME WARRANTY !!

      This cast aluminum thermo housing assembly replaces OEM P/N 022-121-117C (022121117C) main housing and OEM P/N 021-121-121C (021121121C) thermostat cover or OEM P/N 022-121-121E (022121121E) thermostat cover, depending on your vehicle. The assembly consists of a cast aluminum main housing and thermostat cover, new bolts, seals, clips and o-rings. You can also choose to add in our billet machined crack pipe and a 70C or 80C thermostat as well. Buy them as a package deal and save $$ !

      The Billet Crackpipes we sell replace :

      OEM P/N 021-121-050C (021121050C) found in 12V VR6
      OEM P/N 022-121-050 (022121050) and 022-121-085 (022121085) found in 24V VR6


      Billet VR6 Crack Pipes for ALL VR6 Engines Corrado thru R32, Cayenne, and Touareg!

      The thermostats we sell are OE replacements for OEM P/N 075-121-113D (075121113D) for the 12V motors and OEM P/N 022-121-113 (022121113) for the 24V motors. You can choose these in either 70C (low temp) or 80C (normal temp). If you need a different thermostat, let us know, we can probably get it !

      NOTE: VR6 housings are individually machined and cleaned of burrs and sharp metal edges from casting process. Your flange may differ slightly from the photos shown.

      Applications :

      Replaces OEM P/N 022-121-117C (022121117C) main housing and OEM P/N 021-121-121C (021121121C) thermostat cover or OEM P/N 022-121-121E (022121121E) thermostat cover, depending on your vehicle. Please verify your OEM P/N before ordering !

      Audi - A3/A3 Quattro, TT/Quattro w/ VR6
      VW – EOS, R32, Golf, Jetta, Passat, Eurovan w/VR6"

    7. 05-09-2018 11:34 PM #81
      "GruvenParts.com builds bulletproof TIG welded Y Pipes to replace the OEM plastic in your VW coolant system!


      Billet Upper Radiator Hose Y Pipes

      PLEASE NOTE : This part is professionally TIG welded! There are no junk tapped threads into thin wall aluminum like the lesser versions offered by unscrupulous rip off artists. And its warranted for life!

      An absolute MUST HAVE for all MK3 VR6 owners and MK4 New Beetle owners. The upper radiator hose on these models is quite a pricey item from the dealer – usually about $100. The most documented cause of replacement on this hose is due to the plastic Y fitting which connects the 3 short hose pieces. The VW Y pipe cannot be bought separately, and is not suited for the high temperatures under the hood. Hell, its plastic – what did you expect?!

      Dont buy the OEM plastic part when you can buy this BILLET ALUMINUM TIG Welded replacement part for half the price!

      If you need a custom water temp sensor port welded on, please let us know. We are happy to perform customization on ANY of our products.

      Replaces the following OEM P/N :

      1H0-122-101E (1H0122101E) – MK3 Golf/Jetta VR6
      3A0-122-101E (3A0122101E) – VR6 Passat
      1C0-121-438A (1C0121438A) – New Beetle
      "

    8. 05-21-2018 11:59 PM #82
      "
      3.2L MK5 VR6 Billet Lightweight Pulley Kits

      MK5 3.2L VR6 Lightweight Pulley Kit

      You guys asked for Billet Aluminum super strong, super lightweight MK5 3.2L VR6 Pulleys and GruvenParts.com listened!

      We are pleased to offer our super sleek billet lightweight crank, water pump, and alternator pulleys for your 3.2L MK5 VR6 engine. These pulleys are precision CNC'd from aircraft grade 6061-T651 billet aluminum. Complete pulley set reduces the engine rotating mass by over 8.5 lbs !!

      Lightweight Billet Aluminum MK5 3.2L VR6 Crank Pulley -- Normal Drive, Not Underdrive.

      It’s time to lose the boat anchor of the steel Audi and VW VR6 crank pulley. This 500 gram lightweight version is the lightest crank pulley out there and IS NOT UNDER-DRIVEN so it wont cause problems with overheating or low alternator voltage! DO NOT RUN AN UNDER-DRIVEN CRANK PULLEY ON YOUR MK5 R32!!! Your engine needs all the water pump speed it can get to properly cool, and also needs proper alternator voltage to spin the electric fans at the correct speed. Using an under-driven crank pulley will cause your VR6 to run hot and is NOT RECOMMENDED. This NORMAL DRIVE lightweight crank pulley will allow the engine to spool up faster while preventing inertial losses caused by the overweight OEM pulley. Comes with a specially machined replacement key for a perfect fit. Fits all of the MK5 3.2L VR6 engines. Please note that this pulley IS 6 rib and specifically machined for the MK5 R32. Replaces OEM P/N 022-105-243J (022105243J)

      Lightweight Billet Aluminum MK5 3.2L VR6 Water Pump Pulley

      The OEM steel water pump pulley is stamped which creates internal stresses that eventually cause the pulley to crack at the sharp bend radius. Needless to say, you don’t need this problem on a hot running VR. Ours is machined from a solid block of aluminum with generous corner radii and is therefore many times stronger than the OEM. Weighing in at a scant 250 grams, its less than half the weight of the stamped OEM steel pulley. Fits all of the MK5 3.2L VR6 engines. Replaces OEM P/N 021-121-031D (021121031D).

      Lightweight Billet Aluminum Alternator Pulley

      A 100 gram paper-light billet aluminum version of the steel OEM alternator pulley that lets the motor spin more freely. Complete your pulley set for a show quality engine bay. Fits all MK5 3.2L VR6 engines.
      "

    9. 05-30-2018 10:51 PM #83
      "


      Click Here for Peloquin Limited Slip Diffs Sold By GruvenParts


      *** GRUVEN BEATS ALL COMPETITOR PRICING - Email [email protected] for Current Pricing Info ***
      We almost always have group buys and specials going on, to get in on the best pricing for these diffs, just email us!


      We've all used his legendary limited slip differentials for years.

      GruvenParts.com is proud to team up with Gary Peloquin to become the newest distributor of these great front and rear limited slip diffs for a wide range of vehicles. If you dont already have 1 installed, trust us, YOU NEED 1! These limited slip diffs improve acceleration, braking, and cornering. Win-Win-Win.

      GruvenParts.com has the best pricing and customer service, please contact us for more info on these great limited slip diffs!

      We offer the following Peloquin LSD's and some others. Please provide your transmission code and shipping address when inquiring via email.

      02M :
      02M-498-005B (02M498005B) MK4 R32 / Audi TT MK1 Front Diff P/N
      MK4R32 / Audi TT MK1 Rear Diff
      02M-498-005A (02M498005A)

      020
      020-498-005A (020498005A)
      020 – 80% kit - This kit increases the factory 20% anti torque steer effect to 80%.

      02J
      02J-498-005A (02J498005A)
      02J-498-005B (02J498005B)

      02A
      02A-498-005A (02A498005A)

      02K
      02K-498-005A (02K498005A)

      02C
      02C-498-005A (02C498005A)
      02C-498-005B (02C498005B)
      02C-498-005 Rear (02C498005)

      02Q
      02Q-498-006A (02Q498006A)
      02Q-498-005B (02Q498005B)

      02E DSG 2WD and 4WD"

    10. 06-05-2018 11:26 PM #84
      "
      MKIII 2.0 ABA Billet Lightweight Crank, Tensioner, and Alternator Pulleys – NON-UNDERDRIVE!

      www.GruvenParts.com offers precision CNC billet lightweight (and Non-Under-driven) crank, tensioner, and alternator pulleys for the ABA 2.0 engines. The pulley set reduces engine rotating mass by over 4 lbs to help you squeeze out every last bit of power, without the problems associated with under-driving components. Our billet tensioner comes ready to install with a 20K rpm bearing to replace the cheap OEM plastic pulley. The crank pulley is a slick dual design which incorporates the power steering v-belt pulley with a light mounting flange (new shorter grade 12.9 attach bolts included). Finally, the alternator pulley is a paper light version of the OEM steel pulley to minimize parasitic losses.

      Check out www.GruvenParts.com for all the billet goodies!

      These parts replace the following OEM part numbers :

      037-105-243A (037105243A) ABA crank pulley
      037-105-253 (037105253) ABA power steering pulley
      028-145-278E (028145278E) ABA serpentine tensioner pulley (also fits MK3 TDI)
      028-903-119F (028903119F) and 028-903-119AA (028903119AA)ABA alternator pulley
      "

    11. 06-11-2018 09:13 PM #85
      "

      Click Here for the GruvenParts 1.8T Billet Dipstick Funnel Combo !

      GruvenParts is proud to re-release these beautiful 1.8T dipstick handles with billet funnels. You can now choose from our high polished or as machined finish ! These parts are precision CNC'd from aerospace grade 6061-T651 aluminum right here in the good ole USA. Don't fall for a Chinese knock off, buy direct from the source.

      Our billet dipstick handle is available in traditional round or retro square designs and will take the place of your existing fugly orange dipstick handle while retaining the stamped steel rigid OEM dipstick wire. Braided wires just don't work as they bend in the tube and can provide incorrect oil level readings. Why not re-use your existing OEM wire AND get rid of the construction cone orange handle ? This is truly the best of both worlds.

      Please CLICK HERE for the DIY on how to easily install our billet dipstick handle onto your existing OEM dipstick.

      Choose from highly polished (shown on left) or as machined (shown on right) to suit your tastes. The highly polished version looks nearly chrome and will really set apart your vehicle at the shows (while never breaking again!). You could also anodize or paint these in whatever color you wish.

      Finally, a bulletproof replacement for the OEM plastic dipstick handle and funnel found on 1.8T VW and Audi!

      This version fits in place of OEM P/N 06A-103-663B (06A103663B) dipstick funnel found on 1.8T Audi TT, MKIV Golf, Jetta, and New Beetle.

      Please make sure to check your specific vehicle, as VW and Audi have both produced several plastic orange versions.

      Got another dipstick not shown on our product page ? Check out our universal billet dipstick handles ! Now you can easily convert almost any dipstick to a billet handle !


      Click Here for GruvenParts Billet Universal Dipstick Handles"

    12. 08-14-2018 09:24 PM #86
      "

      Click Here for the GruvenParts 1.8T Billet Dipstick Funnel Combo !

      GruvenParts is proud to re-release these beautiful 1.8T dipstick handles with billet funnels. You can now choose from our high polished or as machined finish ! These parts are precision CNC'd from aerospace grade 6061-T651 aluminum right here in the good ole USA. Don't fall for a Chinese knock off, buy direct from the source.

      Our billet dipstick handle is available in traditional round or retro square designs and will take the place of your existing fugly orange dipstick handle while retaining the stamped steel rigid OEM dipstick wire. Braided wires just don't work as they bend in the tube and can provide incorrect oil level readings. Why not re-use your existing OEM wire AND get rid of the construction cone orange handle ? This is truly the best of both worlds.

      Please CLICK HERE for the DIY on how to easily install our billet dipstick handle onto your existing OEM dipstick.

      Choose from highly polished (shown on left) or as machined (shown on right) to suit your tastes. The highly polished version looks nearly chrome and will really set apart your vehicle at the shows (while never breaking again!). You could also anodize or paint these in whatever color you wish.

      Finally, a bulletproof replacement for the OEM plastic dipstick handle and funnel found on 1.8T VW and Audi!

      This version fits in place of OEM P/N 06A-103-663B (06A103663B) dipstick funnel found on 1.8T Audi TT, MKIV Golf, Jetta, and New Beetle.

      Please make sure to check your specific vehicle, as VW and Audi have both produced several plastic orange versions.

      Got another dipstick not shown on our product page ? Check out our universal billet dipstick handles ! Now you can easily convert almost any dipstick to a billet handle !


      Click Here for GruvenParts Billet Universal Dipstick Handles"

    13. 09-11-2018 10:36 PM #87
      "
      3.2L MK5 VR6 Billet Lightweight Pulley Kits

      MK5 3.2L VR6 Lightweight Pulley Kit

      You guys asked for Billet Aluminum super strong, super lightweight MK5 3.2L VR6 Pulleys and GruvenParts.com listened!

      We are pleased to offer our super sleek billet lightweight crank, water pump, and alternator pulleys for your 3.2L MK5 VR6 engine. These pulleys are precision CNC'd from aircraft grade 6061-T651 billet aluminum. Complete pulley set reduces the engine rotating mass by over 8.5 lbs !!

      Lightweight Billet Aluminum MK5 3.2L VR6 Crank Pulley -- Normal Drive, Not Underdrive.

      It’s time to lose the boat anchor of the steel Audi and VW VR6 crank pulley. This 500 gram lightweight version is the lightest crank pulley out there and IS NOT UNDER-DRIVEN so it wont cause problems with overheating or low alternator voltage! DO NOT RUN AN UNDER-DRIVEN CRANK PULLEY ON YOUR MK5 R32!!! Your engine needs all the water pump speed it can get to properly cool, and also needs proper alternator voltage to spin the electric fans at the correct speed. Using an under-driven crank pulley will cause your VR6 to run hot and is NOT RECOMMENDED. This NORMAL DRIVE lightweight crank pulley will allow the engine to spool up faster while preventing inertial losses caused by the overweight OEM pulley. Comes with a specially machined replacement key for a perfect fit. Fits all of the MK5 3.2L VR6 engines. Please note that this pulley IS 6 rib and specifically machined for the MK5 R32. Replaces OEM P/N 022-105-243J (022105243J)

      Lightweight Billet Aluminum MK5 3.2L VR6 Water Pump Pulley

      The OEM steel water pump pulley is stamped which creates internal stresses that eventually cause the pulley to crack at the sharp bend radius. Needless to say, you don’t need this problem on a hot running VR. Ours is machined from a solid block of aluminum with generous corner radii and is therefore many times stronger than the OEM. Weighing in at a scant 250 grams, its less than half the weight of the stamped OEM steel pulley. Fits all of the MK5 3.2L VR6 engines. Replaces OEM P/N 021-121-031D (021121031D).

      Lightweight Billet Aluminum Alternator Pulley

      A 100 gram paper-light billet aluminum version of the steel OEM alternator pulley that lets the motor spin more freely. Complete your pulley set for a show quality engine bay. Fits all MK5 3.2L VR6 engines.
      "

    14. 09-18-2018 01:10 AM #88
      "
      02A Billet Stainless Steel Short Shifter Bracket

      Replace the weak plastic link in your cable shift mechanism with this one made from Aerospace grade, hardened stainless steel. Reduces side/side shift throw by 35%! This part replaces OEM P/N 1J0-711-256 (1J0711256) an 1H0-711-260 (1H0711260) common to most 02A cable shift MK3, MK4 Jettas, Golfs, TDI’s, Beetles, Passats, and Corrado VR6.

      Replaces OEM P/N 1J0-711-256 (1J0711256) and 1H0-711-260 (1H0711260).


      Stainless FWD/AFT Steel Shift Cable Repair Block

      GruvenParts.com is proud to release these solid stainless fwd/aft cable and side/side cable shift repair blocks for cable shift VW vehicles. These parts will quickly replace the weak forward end of the factory fwd/aft and side/side shift cables P/N 1H0711265 (1HO-711-265) where it connects to the transmission linkage. There is no need to source an entire shift cable mechanism (which is very hard to find, and also quite pricey) in the event of a broken fwd/aft or side/side shift cable. And if your cables are not yet broken, throw 1 of each of these in the glove box and be prepared for the inevitable!

      These repair blocks repair the FWD/AFT and SIDE/SIDE cables P/N 1H0711265 (1HO-711-265) common to most 02A cable shift MK3, MK4 Jettas, Golfs, TDI’s, Beetles, Passats, and Corrado VR6. Please select the appropriate cable, as the blocks are different.

      Add some indestructible hardware to the factory cable shift mechanism where it needs it most! Buy these parts together and save!!
      "

    15. 09-24-2018 10:35 PM #89
      "
      Billet 12V VR6 Drive Belt Pulleys - All 12V VR6

      GruvenParts.com offers a complete set of ultra sleek lightweight 12V VR6 power pulleys. These include lightweight billet crank, power steering, water pump, tensioner, and alternator pulleys for your 12V VR6 engine. These pulleys are precision CNC'd from aircraft grade billet aluminum and reduce the rotating mass by a whopping 8.5 lbs! All pulleys ARE NORMAL DRIVE (NOT UNDER-DRIVE). These pulleys will not change the speed of the supercharger and will not void any supercharger warranties. Comes with new crank bolt !

      Buy them as a set and save!

      These pulleys replace the following OEM part numbers :

      Crank Pulley : 021-105-243 (021105243)
      Tensioner Pulley: 021-145-299 (021145299)
      Water Pump Pulley: 021-121-031A (021121031A)
      Alternator Pulley: 021-903-119 (021903119)
      Power Steering Pulley : 021-145-255 (021145255)
      "

    16. 10-29-2018 09:52 PM #90
      "
      Billet VW/Audi VR6/V6/V8 Oil Filter Housings !

      In Stock Ready to Ship !!

      This product is intended to replace VW/Audi Part Numbers 021-115-433A (021115433A) and 021-115-433B (021115433B) housings.

      It will fit the following vehicles :

      VW Corrado (1992-1995 w/AAA VR6 engine)
      VW Golf and Jetta/Wagon (1993-2006 w/AAA and AFP VR6 engines)
      VW Passat (1992-1997 w/AAA VR6 engine)
      VW Touareg (2003-2007 w/3.2 and 3.6 V6 engines)
      VW Eurovan (1996-2004 w/AES V6 engine)
      Audi A8/S8 (2000-2003 w/4.2L AUX V8 engine)
      Audi Q7 (2007-2009 w/3.6L BHK V6 engine)
      "

    17. 11-20-2018 12:57 AM #91
      "
      MKIII 2.0 ABA Billet Lightweight Crank, Tensioner, and Alternator Pulleys – NON-UNDERDRIVE!

      www.GruvenParts.com offers precision CNC billet lightweight (and Non-Under-driven) crank, tensioner, and alternator pulleys for the ABA 2.0 engines. The pulley set reduces engine rotating mass by over 4 lbs to help you squeeze out every last bit of power, without the problems associated with under-driving components. Our billet tensioner comes ready to install with a 20K rpm bearing to replace the cheap OEM plastic pulley. The crank pulley is a slick dual design which incorporates the power steering v-belt pulley with a light mounting flange (new shorter grade 12.9 attach bolts included). Finally, the alternator pulley is a paper light version of the OEM steel pulley to minimize parasitic losses.

      Check out www.GruvenParts.com for all the billet goodies!

      These parts replace the following OEM part numbers :

      037-105-243A (037105243A) ABA crank pulley
      037-105-253 (037105253) ABA power steering pulley
      028-145-278E (028145278E) ABA serpentine tensioner pulley (also fits MK3 TDI)
      028-903-119F (028903119F) and 028-903-119AA (028903119AA)ABA alternator pulley
      "

    18. 12-11-2018 09:41 PM #92
      "
      Lightweight MK4 1.8T / 2.0 Billet Drive Belt Pulleys

      GruvenParts.com offers a complete set of ultra sleek lightweight MK4 1.8T/2.0 power pulleys. These include lightweight billet crank, power steering, tensioner, and alternator pulleys for your MK4 1.8T/2.0 engine. These pulleys are precision CNC'd from aircraft grade billet aluminum and reduce the rotating mass by more than 5 lbs! All pulleys with exception of power steering pulley ARE NORMAL DRIVE (NOT UNDER-DRIVE). Our testing has determined that ONLY the power steering pulley should be under-driven (slightly). All other pulleys in the system rotate at the OEM speed. These pulleys will not change the speed of the supercharger and will not void any supercharger warranties.

      Buy them as a set and save!

      These pulleys replace OEM part numbers :
      06A-105-243E (06A105243E) MK4 1.8T/2.0 crank pulley
      038-145-255A (038145255A) MK4 1.8T/2.0 power steering pulley
      022-903-119 (022903119) MK4 1.8T/2.0 alternator pulley
      06A-903-315E (06A903315E) MK4 1.8T/2.0 tensioner pulley
      "

    Page 4 of 4 FirstFirst 1234

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •