VWVortex.com - Urs6 coilovers
Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Results 1 to 3 of 3

    Thread: Urs6 coilovers

    1. 01-01-2018 12:08 PM #1
      Hello all
      I’m after some urs6 coil overs as my h&r 29800 springs just not giving me the satisfying height .
      As I was searching the net I found this
      http://www.tatechnix.de/tatechnix/gx...--typ-c4.html/
      In the descriptions it states that it will fit c4 s6
      Is anyone on here running these currently on there Urs4/6 ? Will it fit on the North American models ?
      The price is very appealing compared to 2b or kw
      Any info would be appreciated

    2. Remove Advertisements

      Advertisements
       

    3. Member JettaGLi16v's Avatar
      Join Date
      Mar 6th, 1999
      Location
      Orlando
      Posts
      446
      Vehicles
      2003 RS6 4.2tt, 81 Caddy Diesel 1.9AAZ TD, 78 camper bus 2.0.
      02-10-2018 02:46 PM #2
      I have never heard of that company, and they look fairly cheap.

      I'm 90% of the way through assembling a set of DIY coilovers per this thread:
      http://forums.quattroworld.com/s4s6/msgs/312613.phtml

      Bilstein sports F&R, Eibach coilover springs, and generic parts & fittings.
      The one decent upgrade I added were the Thuppu camber plates. You can find him on the s2forum.

      Also, if you are going a good bit lower than the standard 1-2" drop, you'll want to customize your front strut housings.
      I'm on H&R "race" springs from ECS, and I can already see my tie rods are a bit higher than parallel with the ground.
      Since I want to be able to lower it a good bit more (to tuck the tires), I lowered the steering arms on the strut housings to restore proper steering geometry.

      Rear coilovers are easy to assemble. The fronts take a little more doing.

      Good luck!

    4. 03-02-2018 02:49 PM #3
      Do you have any images of the S6 you could show on the race springs?

      Im in the market for an S6, he already says he has H&R's on there, but the ride height still isnt where I want it. Was thinking I could swap out the ones for race springs to go lower, but not sure if its going to get low enough.

      Let me know, thanks!

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •