VWVortex.com - Clutch Flywheel kit for AEB with 02A
Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Results 1 to 5 of 5

    Thread: Clutch Flywheel kit for AEB with 02A

    1. 08-14-2019 04:13 AM #1
      Hi,

      Can anyone link to a kit or give part number that fits AEB with 02A gearbox?
      did a lot of research and found only to trans engine.

      thanks in advance!

      //F

    2. Remove Advertisements

      Advertisements
       

    3. Geriatric Member need_a_VR6's Avatar
      Join Date
      May 19th, 1999
      Location
      Oxford, PA
      Posts
      37,134
      Vehicles
      15 Jetta 92 Corrado VR6
      08-14-2019 06:24 AM #2
      Same as any other 4cyl with 02a. Common would be using the g60 setup.
      -Paul
      1992 Corrado - ALL MOTOR Drag Project [email protected] and falling
      KPTuned - Official MegaSquirt: Sales - Repair - Installation - Tuning

    4. 08-15-2019 02:41 AM #3
      thanks, but when i talk to this site its not the same. quick check is my height from crank mounting face to fingers is around 85mm and the vr6/g60 is 60... i was thinking of buying this but now i dont know what is correct to buy.

      https://www.darksidedevelopments.co....j-02a-02r.html

    5. Remove Advertisements

      Advertisements
       

    6. 08-15-2019 04:30 AM #4
      When i read others at this forum some is saying to use original 20v flywheel with VR6 Clutch Disc and G60 Pressure Plate. is that possible and is this correct then?


      20v flywheel:

      https://www.autodoc.co.uk/sachs/1219868?search=SACHS Flywheel (2294 002 144)

      VR6 Clutch Disc:

      https://www.autodoc.co.uk/sachs/783741

      G60 Pressure Plate:

      https://www.autodoc.co.uk/sachs/784508

      Thanks!

    7. Member sdezego's Avatar
      Join Date
      Apr 23rd, 2004
      Location
      Hurricane Central FL
      Posts
      12,445
      Vehicles
      '90 Corrado | '62 Harley Panhead
      08-16-2019 10:23 AM #5
      Quote Originally Posted by pappi76 View Post
      thanks, but when i talk to this site its not the same. quick check is my height from crank mounting face to fingers is around 85mm and the vr6/g60 is 60... i was thinking of buying this but now i dont know what is correct to buy.

      https://www.darksidedevelopments.co....j-02a-02r.html

      This is what you want. The reason for the VR6 Clutch kit (disk and pressure plate) is that the Pressure Plate has more clamping force than the G60. That other link you posted is a Dual Mass flywheel from a later car.

      Above 228mm kit is for any 02a/o2j on any 4cyl Mk1,Mk2,Mk3,Mk4

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •