VW Vortex - Volkswagen Forum banner

Wobble Bolts Spec

630 views 0 replies 1 participant last post by  speedhunter 
#1 ·
ok so I need your help just to confirm

I have 18 x 7.0 52.5mm offset 5 x 114.3 Wheel. I just update the front brake pad + rotor and now the caliper touch the Inside of my Wheel so if I install a 5mm spacer everything is ok … but the Wheel Don't seat well against the hub so I need to go 10mm spacer with the hubcentric and I already have some home so Don't want to go buy 8mm even if it's possible.

So right now I have dai wobble bolts 14 x 1.5 28mm shank so right now I Don't have enough thread from the bolt to be secure.

So right now 9mm (Wheel material) + 4 (space between rotor and thread in the hub) + 10mm (spacer) + 28mm (all the thread space in the Wheel hub = 52 mm

So if I order new custom wobble bolt if I got with a 14 x 1.5 50mm shank will everything will be ok and fit perfectly ?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top