I would like to retrofit cruise control - Tempomat in my Passat B5 3B2 1.9TDI AFN January 1997 (with low cost aftermarket, ebay like parts...)
It's driven by my daughter, I take care of it as an hobby, I already got lot of info on how to do it, but I have the following doubts:
There are mainly 2 types of stalks/switches for selling, 8L0 953 513 A and 18G 953 513 A, and both offered as a packge with same wire loom 1J1 970 011 F
(I noticed now that I don't have yet 5 post, so I can't post links, had to remove them and leave only text...)
8L0 953 513 A (main button: +/RES/ON/OFF)
18G 953 513 A (main button: ON/OFF only)
1J1 970 011 F
I think it should be the 8L0 953 513 A, but as it looks both can use the same wiring, can I instead use the 18G 953 513 A ?
Or none of them will work with the wiring 1J1 970 011 F ?
In that case, I could make the wiring myself if I could get the schematics or the info on where to connect the pins (or signals) of the cruise control switch...
Engine ECU Bosch MSA 15: 0 281 001 555/556 (VW id: 028906021DT)
VIN no: WVWZZZ3BZVE035252